PerformanceTrucks.net Forums
Starting on stand along wiring harness
Starting on stand along wiring harness
0 2017/01/21 18:18:11
My truck, project in the works
My truck, project in the works
0 2017/01/20 07:13:31
Bent conecting rod on #1 cylinder I had to replace, my bad , I should of removed the spark plugs before I turned it over.
Bent conecting rod on #1 cylinder I had to replace, my bad , I should of removed the spark plugs before I turned it over.
0 2017/01/20 07:11:25
Headers fit good
Headers fit good
0 2017/01/20 07:11:20
Adaptor plate used to bolt the np241 transferr case to the 4l80e transmission, so I can get the passenger Sid drop needed
Adaptor plate used to bolt the np241 transferr case to the 4l80e transmission, so I can get the passenger Sid drop needed
0 2017/01/20 07:11:14
Getting ready to drop in the new running gear
Getting ready to drop in the new running gear
0 2017/01/20 07:11:06
The new hart of the project. 6.0 lq4 , 4l80e
The new hart of the project. 6.0 lq4 , 4l80e
0 2017/01/20 07:11:00
0 2017/01/20 07:10:53
Opened up in put shaft changed out, so I bolt it to the 4l80e
Opened up in put shaft changed out, so I bolt it to the 4l80e
0 2017/01/20 07:10:46
Np241
Np241
0 2017/01/20 07:10:40
Changing the input shaft np241 transfer case , so it will bolt up to my 4l80e transmission and give me the passenger side drop I need
Changing the input shaft np241 transfer case , so it will bolt up to my 4l80e transmission and give me the passenger side drop I need
0 2017/01/20 07:10:34
6.0 and 4l80e transmission sitting inplace
6.0 and 4l80e transmission sitting inplace
0 2017/01/20 07:10:28
Lots of clearance on the headers, just had to trim off a tab on the transmission , to make it work
Lots of clearance on the headers, just had to trim off a tab on the transmission , to make it work
0 2017/01/20 07:10:21
Got to change my steering setup. To close to header, and I don't like it.lol
Got to change my steering setup. To close to header, and I don't like it.lol
0 2017/01/20 07:10:15
Mounting plates and headers test fitting
Mounting plates and headers test fitting
0 2017/01/20 07:10:08
Mounting plates I used so I can use the 1983 mount setup
Mounting plates I used so I can use the 1983 mount setup
0 2017/01/20 07:09:59
6 liter and 4l80e inplace
6 liter and 4l80e inplace
0 2017/01/20 07:09:54
Transfer case I was going to use but, changed mind again. Going with np241 instead
Transfer case I was going to use but, changed mind again. Going with np241 instead
0 2017/01/20 07:09:47
350 and 700r4 out of truck, changed my mind. Instead 6.0 lq4 and 4l80e going in
350 and 700r4 out of truck, changed my mind. Instead 6.0 lq4 and 4l80e going in
0 2017/01/20 07:09:39
Fuel injected gas tank out of a 1988 full size blazer.
Fuel injected gas tank out of a 1988 full size blazer.
0 2017/01/20 07:09:32
0 2017/01/20 07:09:26
Original chassis , pushed out back
Original chassis , pushed out back
0 2017/01/20 07:09:18
Original chassis, engine sold
Original chassis, engine sold
0 2017/01/20 07:09:14
Original chassis
Original chassis
0 2017/01/20 07:09:13
Body just payed on the 1983 chassis
Body just payed on the 1983 chassis
0 2017/01/20 07:09:11
boddy just payed on the 1983 chassis
boddy just payed on the 1983 chassis
0 2017/01/20 07:09:03
Cab off original chassis
Cab off original chassis
0 2017/01/20 07:08:56
Cab and front clip off original chassis
Cab and front clip off original chassis
0 2017/01/20 07:08:44
Cab on the 1983 chassis
Cab on the 1983 chassis
0 2017/01/20 07:08:39
Cab removed from the original chassiss
Cab removed from the original chassiss
0 2017/01/20 07:08:32
Cab sitting on the 1983 chassis
Cab sitting on the 1983 chassis
0 2017/01/20 07:08:27
Chassis shortened and 350 engine in it
Chassis shortened and 350 engine in it
0 2017/01/20 07:08:21
0 2017/01/20 07:08:13
Yep chassis again
Yep chassis again
0 2017/01/20 07:08:05
When I bought the truck. Put new fenders,wheels and tires. Trying to figure what to do with it
When I bought the truck. Put new fenders,wheels and tires. Trying to figure what to do with it
0 2017/01/20 07:07:58
Welding primed, it all has to be taken apart again for paint
Welding primed, it all has to be taken apart again for paint
0 2017/01/20 07:07:55
Starting to put chassis together, 350/700r4.
Starting to put chassis together, 350/700r4.
0 2017/01/20 07:07:48
Chassis welded up
Chassis welded up
0 2017/01/20 07:07:44
Chassis cut
Chassis cut
0 2017/01/20 07:07:41
We're I cut the chassis
We're I cut the chassis
0 2017/01/20 07:07:36