PerformanceTrucks.net Forums
0 2017/01/20 07:10:53
Fuel injected gas tank out of a 1988 full size blazer.
Fuel injected gas tank out of a 1988 full size blazer.
0 2017/01/20 07:09:32
Chassis shortened and 350 engine in it
Chassis shortened and 350 engine in it
0 2017/01/20 07:08:21
Opened up in put shaft changed out, so I bolt it to the 4l80e
Opened up in put shaft changed out, so I bolt it to the 4l80e
0 2017/01/20 07:10:46
0 2017/01/20 07:09:26
0 2017/01/20 07:08:13
Yep chassis again
Yep chassis again
0 2017/01/20 07:08:05
Np241
Np241
0 2017/01/20 07:10:40
Original chassis , pushed out back
Original chassis , pushed out back
0 2017/01/20 07:09:18
Changing the input shaft np241 transfer case , so it will bolt up to my 4l80e transmission and give me the passenger side drop I need
Changing the input shaft np241 transfer case , so it will bolt up to my 4l80e transmission and give me the passenger side drop I need
0 2017/01/20 07:10:34
Original chassis, engine sold
Original chassis, engine sold
0 2017/01/20 07:09:14
When I bought the truck. Put new fenders,wheels and tires. Trying to figure what to do with it
When I bought the truck. Put new fenders,wheels and tires. Trying to figure what to do with it
0 2017/01/20 07:07:58
Welding primed, it all has to be taken apart again for paint
Welding primed, it all has to be taken apart again for paint
0 2017/01/20 07:07:55
Original chassis
Original chassis
0 2017/01/20 07:09:13
6.0 and 4l80e transmission sitting inplace
6.0 and 4l80e transmission sitting inplace
0 2017/01/20 07:10:28
Body just payed on the 1983 chassis
Body just payed on the 1983 chassis
0 2017/01/20 07:09:11
Starting to put chassis together, 350/700r4.
Starting to put chassis together, 350/700r4.
0 2017/01/20 07:07:48
Lots of clearance on the headers, just had to trim off a tab on the transmission , to make it work
Lots of clearance on the headers, just had to trim off a tab on the transmission , to make it work
0 2017/01/20 07:10:21
Got to change my steering setup. To close to header, and I don't like it.lol
Got to change my steering setup. To close to header, and I don't like it.lol
0 2017/01/20 07:10:15
My truck, project in the works
My truck, project in the works
0 2017/01/20 07:13:31
Chassis welded up
Chassis welded up
0 2017/01/20 07:07:44
boddy just payed on the 1983 chassis
boddy just payed on the 1983 chassis
0 2017/01/20 07:09:03
Mounting plates and headers test fitting
Mounting plates and headers test fitting
0 2017/01/20 07:10:08
Cab off original chassis
Cab off original chassis
0 2017/01/20 07:08:56
Chassis cut
Chassis cut
0 2017/01/20 07:07:41
Bent conecting rod on #1 cylinder I had to replace, my bad , I should of removed the spark plugs before I turned it over.
Bent conecting rod on #1 cylinder I had to replace, my bad , I should of removed the spark plugs before I turned it over.
0 2017/01/20 07:11:25
Cab and front clip off original chassis
Cab and front clip off original chassis
0 2017/01/20 07:08:44
We're I cut the chassis
We're I cut the chassis
0 2017/01/20 07:07:36
Headers fit good
Headers fit good
0 2017/01/20 07:11:20
Mounting plates I used so I can use the 1983 mount setup
Mounting plates I used so I can use the 1983 mount setup
0 2017/01/20 07:09:59
Cab on the 1983 chassis
Cab on the 1983 chassis
0 2017/01/20 07:08:39
Adaptor plate used to bolt the np241 transferr case to the 4l80e transmission, so I can get the passenger Sid drop needed
Adaptor plate used to bolt the np241 transferr case to the 4l80e transmission, so I can get the passenger Sid drop needed
0 2017/01/20 07:11:14
Getting ready to chop,the chassis
Getting ready to chop,the chassis
0 2017/01/20 07:07:33
6 liter and 4l80e inplace
6 liter and 4l80e inplace
0 2017/01/20 07:09:54
Transfer case I was going to use but, changed mind again. Going with np241 instead
Transfer case I was going to use but, changed mind again. Going with np241 instead
0 2017/01/20 07:09:47
What to cut out of the 1983 chassis to get the wheel base
What to cut out of the 1983 chassis to get the wheel base
0 2017/01/20 07:07:31
Cab removed from the original chassiss
Cab removed from the original chassiss
0 2017/01/20 07:08:32
Getting ready to drop in the new running gear
Getting ready to drop in the new running gear
0 2017/01/20 07:11:06
350 and 700r4 out of truck, changed my mind. Instead 6.0 lq4 and 4l80e going in
350 and 700r4 out of truck, changed my mind. Instead 6.0 lq4 and 4l80e going in
0 2017/01/20 07:09:39
The new hart of the project. 6.0 lq4 , 4l80e
The new hart of the project. 6.0 lq4 , 4l80e
0 2017/01/20 07:11:00