PerformanceTrucks.net Forums
The wheels have a +15 offset which works out to something close to 5.6" backspacing, which puts them right about flush with the fender lips!!!
The wheels have a +15 offset which works out to something close to 5.6" backspacing, which puts them right about flush with the fender lips!!!
0 2017/01/09 18:20:36
General grabber x 3s in 295/55r20
General grabber x 3s in 295/55r20
0 2017/01/09 18:20:31
0 2017/01/09 18:20:28
As much as i liked the factory wheels, i wanted a different look and some meaty tires, and after the flood i have decided a lift is eventually in order...
As much as i liked the factory wheels, i wanted a different look and some meaty tires, and after the flood i have decided a lift is eventually in order...
0 2017/01/09 18:20:23
0 2017/01/05 20:46:05
0 2016/12/26 22:08:01
Airbox and fender mod done....
Airbox and fender mod done....
0 2016/12/26 22:07:57
And the passenger side fender and inner liner moved and trimmed.... harsh turns (like everymorning keaving the house) the tire would just barely touch the last 1/4-1/2 or so of the fender itself and the fender liner would get pulled up from the fender.... killed both birds with one stone... havent done the metal work to the left fender yet, just trimmed the liner... overall much better i actually did a few lock to lock figure 8s in the parking lot at work when i was done...
And the passenger side fender and inner liner moved and trimmed.... harsh turns (like everymorning keaving the house) the tire would just barely touch the last 1/4-1/2 or so of the fender itself and the fender liner would get pulled up from the fender.... killed both birds with one stone... havent done the metal work to the left fender yet, just trimmed the liner... overall much better i actually did a few lock to lock figure 8s in the parking lot at work when i was done...
0 2016/12/16 12:03:43
Half ass pic of both batteries installed
Half ass pic of both batteries installed
0 2016/12/16 12:03:36
Driver side main battery
Driver side main battery
0 2016/12/16 12:03:31
Passenger/auxiliary battery, finally connected, only been in the tray for about 5 or 6 months, and not hooked up, was trying to wait to get the headers installed but 19* last night made this a bit more pressing....
Passenger/auxiliary battery, finally connected, only been in the tray for about 5 or 6 months, and not hooked up, was trying to wait to get the headers installed but 19* last night made this a bit more pressing....
0 2016/12/16 12:03:26
Pinion bearing remover/installer for gm 8.25....
Pinion bearing remover/installer for gm 8.25....
0 2016/12/12 12:40:20
Adjuster for side bearing shims
Adjuster for side bearing shims
0 2016/12/12 12:40:11
Swapped out my front turn signal lenses, bought them like 3 months ago and got tired of the factory replacemants i had filling up with water, and the chrome had turned black! Was time to get these in finally!!
Swapped out my front turn signal lenses, bought them like 3 months ago and got tired of the factory replacemants i had filling up with water, and the chrome had turned black! Was time to get these in finally!!
0 2016/12/11 12:23:51
Changed the entire dash to an 04 and style in dark charcoal...
Changed the entire dash to an 04 and style in dark charcoal...
0 2016/11/28 21:48:01
0 2016/11/28 21:47:56
Tahoe LT door panels
Tahoe LT door panels
0 2016/11/28 21:47:51
Leather heated memory avalanche front buckets (that I still need to get recovered
Leather heated memory avalanche front buckets (that I still need to get recovered
0 2016/11/28 21:47:47
0 2016/11/28 21:47:44
0 2016/11/28 21:47:39
Nnbs console/center seat...
Nnbs console/center seat...
0 2016/11/28 21:47:39
0 2016/11/28 21:47:37
0 2016/11/28 21:47:35
0 2016/11/28 21:47:33
My truck started out as a base model LS with cloth manual split bench in lite titanium i think it was called, I had to replace the accumulator and heater core so I decided to go ahead and replace the entire entire interior and do all the mods i had been wanting to do.....
My truck started out as a base model LS with cloth manual split bench in lite titanium i think it was called, I had to replace the accumulator and heater core so I decided to go ahead and replace the entire entire interior and do all the mods i had been wanting to do.....
0 2016/11/28 21:47:31
0 2016/11/28 21:47:27
Double din and led conversion in all the switches and dash...
Double din and led conversion in all the switches and dash...
0 2016/11/28 21:47:22
I also swapped in the lower dash panel and added a usb port from an nnbs truck to my pioneer head unit for my phone and also eliminated the dash cupholders and wired in the power port in the center console/seat from an nnbs with the three cupholders...
I also swapped in the lower dash panel and added a usb port from an nnbs truck to my pioneer head unit for my phone and also eliminated the dash cupholders and wired in the power port in the center console/seat from an nnbs with the three cupholders...
0 2016/11/28 21:20:48
There is a spot on the driver side door, fender and (i am sure) the cab side that need to have the paint touched up, mostly due to someone not having a clue about bodywork...
There is a spot on the driver side door, fender and (i am sure) the cab side that need to have the paint touched up, mostly due to someone not having a clue about bodywork...
0 2016/11/11 18:40:48
Thought it looked familiar, but..... mines bigger!!
Thought it looked familiar, but..... mines bigger!!
0 2016/11/03 17:25:09
Reason i asked....
Reason i asked....
0 2016/11/02 20:57:22
Not the best picture, but i wasnt focusing on radio install at the time so much as the led conversion in the ac head...
Not the best picture, but i wasnt focusing on radio install at the time so much as the led conversion in the ac head...
0 2016/10/27 05:04:16
0 2016/10/24 20:33:44
For a set of denali tail lights
For a set of denali tail lights
0 2016/10/24 20:33:39
Got rid of these ugly ass red lenses
Got rid of these ugly ass red lenses
0 2016/10/24 20:33:33
Replaced and programmed fpcm tonight, as much water came out of the module i am surprised it ever ran... pulling it out covered half of my hand in water.... was still running out when i was pulling the mounting bolts
Replaced and programmed fpcm tonight, as much water came out of the module i am surprised it ever ran... pulling it out covered half of my hand in water.... was still running out when i was pulling the mounting bolts
0 2016/10/18 18:21:39
Here is a 2wd case...
Here is a 2wd case...
0 2016/10/18 09:22:49
The rear of the vette/4wd case, on 2wd one of the divets at 6 and 12 oclock to the shaft are open
The rear of the vette/4wd case, on 2wd one of the divets at 6 and 12 oclock to the shaft are open
0 2016/10/18 09:19:02
0 2016/10/16 17:49:00
Seat harness connector is corroded pretty good on passenger side, but for ow seat is working fine!!!
Seat harness connector is corroded pretty good on passenger side, but for ow seat is working fine!!!
0 2016/10/16 17:48:55