I was told for the 60E to 80E segment swap all I needed to do was email my tune to someone at HPT? Then they'd email it back to me?

-or do I need to look into doing it myself, this is just a bit of uncharted water for me.

 

i haven't been on the HPT site much lately but yeah EC Tune was doing it for people last I recall.

 

Contact HPT support it took them 10 min to get mine done.

 

Just use a 6.0 4l80e bin with your engine parameters

 

if they do it will I retain all my previous trans settings? Lockup? Shift properties/pressures/points/speed etc??? Or will I have to start from scratch on my trans tune. I hope not, it took a LONG damn time to get my trans like I wanted it LOL

 

You'll have to do it all over again.

 

all trans tables will be stock.

 

They're going to all be different any way, you have all different gear ratios and a different shifting characteristic type of tranny.

PS, I did my own segment swap

 

when I had them do my segment swap and I went to Nic for my tune he ended up needing to download a whole new driver. There was something not right I cant remember but my IAC counts were too high so he took a whole VIN from HPT that started life as a 6.0/80e and just swapped out the VINs

 

That is my method of choice