I got the nelson harness for e-fans
#1
On The Tree
Thread Starter
Join Date: Oct 2005
Location: Ohio
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
I got the nelson harness for e-fans
Hey guys;
let me ask this, i got the harness today and this should hook up to my
flex-a-lite fans with no problems and VSC i dont use right? so the harness from nelson and the fans hook up together right? sorry about all the questions, when it comes to electrical i get nervous. one more thing, when everything is completed, i need to have the pcm flashed to activate the fans too right?
thanks to all
let me ask this, i got the harness today and this should hook up to my
flex-a-lite fans with no problems and VSC i dont use right? so the harness from nelson and the fans hook up together right? sorry about all the questions, when it comes to electrical i get nervous. one more thing, when everything is completed, i need to have the pcm flashed to activate the fans too right?
thanks to all
#2
Moderator
iTrader: (19)
the harness should have came with a diagram to hook it up. follow them to the T and you will be fine. throw away the vsc. its junk make sure the fans are pulling air into the engine compartment. flex-a-lite decided the black wire was positive for some reason
before you install all of it make sure you have pin 42 activated to run the electric fans. allen can do it for you.
before you install all of it make sure you have pin 42 activated to run the electric fans. allen can do it for you.
Thread
Thread Starter
Forum
Replies
Last Post
Wrecker 426
Tuning, Diagnostics, Electronics, and Wiring
1
09-30-2015 09:39 PM
kalikid06
Tuning, Diagnostics, Electronics, and Wiring
4
09-20-2015 07:46 PM