EBCM Wiring Info
#1
EBCM Wiring Info
Anyone have a schematic for a 2009 Silverado EBCM? When I disable my stabilitrak and tcs (hold button for 5 sec), It is disabling brake torque management as it should because I have it tuned to. However, once I let off the brake with the gas on the floor, the stabilitrak still activates and applies abs to stop the wheelspin. I know its not limiting with tcs by spark, throttle,or fuel from my log files, tps is 100%, there is no fuel cutoff and spark is in the low to mid 20's when it happens, never pulls timing. I have all tq management disabled as well as abuse mode.
So today I pulled the 2 abs fuses under the hood and I verified it is indeed the abs kicking in even with stablitrak disabled. It will spin like crazy now.
So, I want to try and get some info on the ebcm, wiring schematic, pinouts, anything to possibly try and work around the abs on the rear wheels when stabilitrak is off.
Any help would greatly be appreciated.
Thanks,
Ryan
So today I pulled the 2 abs fuses under the hood and I verified it is indeed the abs kicking in even with stablitrak disabled. It will spin like crazy now.
So, I want to try and get some info on the ebcm, wiring schematic, pinouts, anything to possibly try and work around the abs on the rear wheels when stabilitrak is off.
Any help would greatly be appreciated.
Thanks,
Ryan
Thread
Thread Starter
Forum
Replies
Last Post
muncie21
Tuning, Diagnostics, Electronics, and Wiring
2
09-07-2015 09:55 PM
Alvin@PCMofNC
Sponsor's Announcements, Sales, and Specials
0
09-03-2015 06:38 AM