Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

Cooler weather???

Thread Tools
 
Search this Thread
 
Old Oct 4, 2006 | 07:15 AM
  #1  
Grumpy5.3's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Nov 2005
Posts: 1,014
Likes: 0
From: South Georgia
Default Cooler weather???

Will cooler weather affect my tune??? or mainly my idle??? Ever since it has cooled off a litle, my truck will surge and buck, try to shut off, and sometimes does....
Any input will be appreciated fellas!!!!


thanks
Brian
Reply
Old Oct 4, 2006 | 07:53 AM
  #2  
Whippled 496's Avatar
TECH Addict
15 Year Member
iTrader: (4)
 
Joined: Jan 2006
Posts: 2,143
Likes: 1
From: Lake Shore, MD
Default

My truck runs considerably better in cooler weather. Not sure why cooler weather would make yours run poor.
Reply
Old Oct 4, 2006 | 08:16 AM
  #3  
Grumpy5.3's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Nov 2005
Posts: 1,014
Likes: 0
From: South Georgia
Default

It runs awsome, its just when it tries to idle is when it shows its ***...
bucking and shutting off and stuff
Reply
Old Oct 4, 2006 | 12:06 PM
  #4  
negativeswitches's Avatar
TECH Fanatic
iTrader: (15)
 
Joined: Feb 2005
Posts: 1,087
Likes: 0
From: belleville, il
Default

is it throwing any codes yet?

mine did this a little when my IAC needed cleaning really bad

i just grabbed some 3M throttle plate cleaner and went to town
Reply
Old Oct 4, 2006 | 12:58 PM
  #5  
Grumpy5.3's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Nov 2005
Posts: 1,014
Likes: 0
From: South Georgia
Default

No codes, I will try the IAC idea, didnt think of that!!!
thanks
Reply
Old Oct 4, 2006 | 04:10 PM
  #6  
RERICK's Avatar
On The Tree
iTrader: (1)
 
Joined: Mar 2006
Posts: 163
Likes: 0
From: Speedwell, Tn.
Default

Also check your MAF , could have oil on it from the filter. Clean it with some electrical contact cleaner. Let us know what you find.
Reply
Old Oct 4, 2006 | 05:11 PM
  #7  
Grumpy5.3's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Nov 2005
Posts: 1,014
Likes: 0
From: South Georgia
Default

I cleaned the throtle plate and the maf contacts.... I think it does it more after it has been sitting a while... I started it up after work today,after sitting in the same spot all day, and let it run for maybe a minute and 1/2. well I had to shut it off and go back in the shop, came back out fired it up and didnt have any problems....



Thanks guys for all of your help and ideas!!!

Brian
Reply
Old Oct 4, 2006 | 07:42 PM
  #8  
negativeswitches's Avatar
TECH Fanatic
iTrader: (15)
 
Joined: Feb 2005
Posts: 1,087
Likes: 0
From: belleville, il
Default

did you remove the t/b and clean it all inside and out take the iac off and clean the port with a q tip?

-erik
Reply
Old Oct 4, 2006 | 07:48 PM
  #9  
Grumpy5.3's Avatar
Thread Starter
TECH Fanatic
iTrader: (14)
 
Joined: Nov 2005
Posts: 1,014
Likes: 0
From: South Georgia
Default

my throttle body is DBW, doesnt really have an iac motor... but the tb was pretty nasty...
Reply
Old Oct 5, 2006 | 02:25 PM
  #10  
RERICK's Avatar
On The Tree
iTrader: (1)
 
Joined: Mar 2006
Posts: 163
Likes: 0
From: Speedwell, Tn.
Default

How about the TEMP. sensors ? Maybe one of them is out of range .
Reply



All times are GMT -5. The time now is 12:10 AM.