I put the Yank 2800 stall in now it feels like its almost sliping. Only does it WOT 1-2 shift .I always get out of it. It just dont feel right { (LOL)I know its a stall.} but anyways like the shift just dont match with what the stall wants to do .I have Efilive anyhelp where to start would be very helpfull. I have the tow haul tune in there now from wait4me.Thanks

 

I don't know the tables in efi live, but if you were dealing with Hp tuners I would suggest setting the TCC max table at 100 & the min table at 90. I'm sure there is a similar table in efi live. Also you might make the TCC apply about 1-2 mph higher than the upshift speed. And set the TCC release speed 1-2 mph higher than the downshift speed.

 

Thanks.. truckmann I will give that a try