80E Swappers Table Help!
Sep 6, 2005 | 11:49 PM
#11
Originally Posted by desTRUCKtive
Well guys for future reference; like zippy and others said you actually have to download and 80E bin file into your PCM, you cannot just copy and paste the 80E tables into your 60E files. There is something that needs to be changed that I have no idea.
But like I said if you swap to the 80E you need to get a file from an 80E tranny.
But like I said if you swap to the 80E you need to get a file from an 80E tranny.
Sep 7, 2005 | 10:19 AM
#12
Thread Starter
TECH Fanatic
Joined: Dec 2004
Posts: 1,099
Likes: 0
From: Tucson AZ
Originally Posted by 99Silver5.3
Usually Speartech will do that change for ya pretty cheap. A simple reflash with Edit or HPT wont cut it
Sep 9, 2005 | 01:12 AM
#16
Thread Starter
TECH Fanatic
Joined: Dec 2004
Posts: 1,099
Likes: 0
From: Tucson AZ
Yeah the crossmember is on i just have to make some reinforcments because I had to cut the hell out in order for the tranny pan to come down some. I am sure running some more steel will take care of that.
Sep 9, 2005 | 02:25 AM
#17
14 Second Truck Club
Joined: Aug 2003
Posts: 3,775
Likes: 0
From: Tucson, AZ
Originally Posted by desTRUCKtive
Yeah the crossmember is on i just have to make some reinforcments because I had to cut the hell out in order for the tranny pan to come down some. I am sure running some more steel will take care of that.
Thread
Thread Starter
Forum
Replies
Last Post
Vortec350ss
Drag Racing
134
Jan 12, 2016 10:36 PM
Wrecker 426
Tuning, Diagnostics, Electronics, and Wiring
1
Sep 30, 2015 09:39 PM
mitchellmade
Tuning, Diagnostics, Electronics, and Wiring
2
Sep 27, 2015 08:27 PM