Tuning, Diagnostics, Electronics, and Wiring HP Tuners | EFILive | Hand Held Programmers | Stand Alone PCM's | Electronics | Wiring Diagrams

1-2 shift - 61% Throttle pulled

Thread Tools
 
Search this Thread
 
Old May 22, 2008 | 07:12 PM
  #1  
KySilverado's Avatar
Thread Starter
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default 1-2 shift - 61% Throttle pulled

I put a stockish transmission awhile back. At the same time I copied and pasted stock TM settings from an SS truck and put it in my tune. Idea being to not beat on the thing. Anyway at full throttle the 1-2 shift has been terrible. A big bah dah at shift. I have been laying it off to the TM.

Anyway I got tired of it and went in and removed the TM. Still doing it. Logged it . Mind you I am DBW. My foot stays planted to the floor and the TPS is going to 39% at the shift. WTF? I've played with it a bit but I am stumped.




Last edited by KySilverado; May 22, 2008 at 07:32 PM.
Reply
Old May 22, 2008 | 07:23 PM
  #2  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

why aren't you reading any boost?
Reply
Old May 22, 2008 | 07:28 PM
  #3  
KySilverado's Avatar
Thread Starter
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default

Because of the throttle pull. I'm in boost right before and after this instance.
Reply
Old May 22, 2008 | 07:30 PM
  #4  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

weird...you never experienced this until the trans swap....hmm
Reply
Old May 22, 2008 | 07:35 PM
  #5  
mcfarlnd's Avatar
Un-Registered User
iTrader: (15)
 
Joined: Nov 2006
Posts: 1,318
Likes: 10
From: DFW
Default

what tranny is it? im assuming 4l80e.what tranny was it before? have you looked at the abuse mode to see if its disabled?
Reply
Old May 22, 2008 | 07:35 PM
  #6  
KySilverado's Avatar
Thread Starter
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default

It would do this occasionally with the FLT but on the 2-3 shift.
Reply
Old May 22, 2008 | 07:40 PM
  #7  
KySilverado's Avatar
Thread Starter
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default

Originally Posted by mcfarlnd
what tranny is it? im assuming 4l80e.what tranny was it before? have you looked at the abuse mode to see if its disabled?
4l65e. Abuse mode is now off. Had been on and thats what I thought was causing the awful shift.

Reply
Old May 22, 2008 | 07:41 PM
  #8  
trever1t's Avatar
2nd fastest 5.3 ECSB
iTrader: (14)
 
Joined: Oct 2005
Posts: 26,690
Likes: 1
From: NorCal
Default

Sometimes mine will read like 97% for a blip and I never really thought much of it.
Reply
Old May 22, 2008 | 07:47 PM
  #9  
KySilverado's Avatar
Thread Starter
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default

Reply
Old May 22, 2008 | 07:49 PM
  #10  
KySilverado's Avatar
Thread Starter
TECH Senior Member
iTrader: (7)
 
Joined: Jun 2004
Posts: 5,446
Likes: 7
From: Central Kentucky
Default

Originally Posted by trever1t
Sometimes mine will read like 97% for a blip and I never really thought much of it.
One of the drawbacks of DBW. You aren't really in control of the throttle.
Reply



All times are GMT -5. The time now is 08:11 PM.