WTT: 99 Formula for Silverado
Jul 14, 2006 | 12:50 PM
#1
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Jun 2004
Posts: 1,109
Likes: 0
From: Baton Rouge, LA
WTT: 99 Formula for Silverado (updated with 408 offer)
New 408 info at bottom in bold:
Looking to trade my 1999 Formula for a Silverado (99+). I'd prefer an extended cab, but will consider a single cab as well. I'm currently not interested in selling the car, as right now I'm very busy with school and am not in the position to sell a car and have any down time without transportation.
1999 Pontiac Firebird Formula M6 96k miles
Navy Blue Metallic/ Graphite Leather Interior
Suncoast Raptor Hood
98-00 WS6 Wheels with Brand New GS-D3's (275/40) in the back and 80% tread on front tires.
Futral Motorsports F13 Camshaft
Crane Gold Series Dual Valve Springs
FMS Hardened Pushrods
LS6 Intake Manifold
MTI Lid
Ported Throttle Body
Mac Midlength Headers
Professionally made 3" ORY pipe with Flowmaster Y collector and 3" Cutout
SLP Dual/Dual Exhaust with Corsa aftermerket tips Exhaust video here
Spec Stage III Clutch with 01+ Hydraulics (12,000 miles)
Eibach Pro-Kit with Bilstein HD shocks
BADZ Lower Control Arms
BMR Adjustable Panhard Rod
SLP Shifter with Lou's short stick
The rear of the car has 2 layers of Dynamat in it, really cuts down the road/exhaust noise.
Has a great idle, shifts smoothly. Oil changed every 3000 miles with Mobil 1. It hasn't been raced once since I've owned it, it's just my daily driver. I installed a brand new GM bumper cover when I put the hood on (February 06) and had the entire front end painted professionally with the fenders matched, and the work couldn't be better. So the front bumper is almost in brand new condition. I'm only getting rid of it because I'm moving to New Orleans, and neither want to put up with the terrible roads nor see it stolen like my last car.
408 information:
I had a 408 c.i. stroker built for my black car that was stolen. I had intended to use it in this car after I bought it, but never had the time or desire to put it in. So, for particular trades, I am offering to give the motor away with this car. The motor is brand new (it is not installed), built by Futral Motorsports (it is still at FMS). It includes all of the following:
-Brand new GM Block (6.0L) $880.00
-Eagle 4340 Forged 4.0" Crankshaft $1000.00
-Diamond shelf pistons $510.00
-Manley Sportsman rods $635.00
-Mahle low tension rings $122.95
-Federal Mogul bearings $200.00
-ARP main studs $150.00
-FMS cam (your choice) $359.95
-Morel hyd lifters $449.95
-GM MLS head gaskets $45.00
-FMS ported oil pump $110.00
-Rollmaster 1140 timing chain $94.00
-misc gaskets $150.00
-Ford 30Lb injectors $249.99
-255lph pump $132.00
-Poly motor mounts $69.95
[B]Attention[/B]: $850.00 is still owed to Allan Futral for blueprinting/balancing/assembly. If you want the motor, you understand that you must pay this $850.00. No, I will not pay it for you, so please do not ask or offer it as part of the trade. This would be ideal for someone local, as you could pick the motor up yourself. I really don't think I can deal with shipping a car and motor at this time, if you really want to, you'll have to arrange it all.
Obviously I will include the motor only for trades that are worth including the motor with. That doesn't mean I'm looking for something spectacular, it just means I wont give it away for a something like a 1999 stock silverado. Someone can potentially get a very good deal out of this and have a 520rwhp+ car for putting $850.00 out of pocket. Not to mention you could easily make that $850 back by selling the car's current short block which runs great and has an F-13 already in it.
If you are interested in trading, please send me photos of the vehicle to lsuxblake@gmail.com or link them in a PM. It's very difficult to be interested in something you cant see. If you want any more pictures of the car, let me know and I will take them and email them to you.
Looking to trade my 1999 Formula for a Silverado (99+). I'd prefer an extended cab, but will consider a single cab as well. I'm currently not interested in selling the car, as right now I'm very busy with school and am not in the position to sell a car and have any down time without transportation.
1999 Pontiac Firebird Formula M6 96k miles
Navy Blue Metallic/ Graphite Leather Interior
Suncoast Raptor Hood
98-00 WS6 Wheels with Brand New GS-D3's (275/40) in the back and 80% tread on front tires.
Futral Motorsports F13 Camshaft
Crane Gold Series Dual Valve Springs
FMS Hardened Pushrods
LS6 Intake Manifold
MTI Lid
Ported Throttle Body
Mac Midlength Headers
Professionally made 3" ORY pipe with Flowmaster Y collector and 3" Cutout
SLP Dual/Dual Exhaust with Corsa aftermerket tips Exhaust video here
Spec Stage III Clutch with 01+ Hydraulics (12,000 miles)
Eibach Pro-Kit with Bilstein HD shocks
BADZ Lower Control Arms
BMR Adjustable Panhard Rod
SLP Shifter with Lou's short stick
The rear of the car has 2 layers of Dynamat in it, really cuts down the road/exhaust noise.
Has a great idle, shifts smoothly. Oil changed every 3000 miles with Mobil 1. It hasn't been raced once since I've owned it, it's just my daily driver. I installed a brand new GM bumper cover when I put the hood on (February 06) and had the entire front end painted professionally with the fenders matched, and the work couldn't be better. So the front bumper is almost in brand new condition. I'm only getting rid of it because I'm moving to New Orleans, and neither want to put up with the terrible roads nor see it stolen like my last car.
408 information:
I had a 408 c.i. stroker built for my black car that was stolen. I had intended to use it in this car after I bought it, but never had the time or desire to put it in. So, for particular trades, I am offering to give the motor away with this car. The motor is brand new (it is not installed), built by Futral Motorsports (it is still at FMS). It includes all of the following:
-Brand new GM Block (6.0L) $880.00
-Eagle 4340 Forged 4.0" Crankshaft $1000.00
-Diamond shelf pistons $510.00
-Manley Sportsman rods $635.00
-Mahle low tension rings $122.95
-Federal Mogul bearings $200.00
-ARP main studs $150.00
-FMS cam (your choice) $359.95
-Morel hyd lifters $449.95
-GM MLS head gaskets $45.00
-FMS ported oil pump $110.00
-Rollmaster 1140 timing chain $94.00
-misc gaskets $150.00
-Ford 30Lb injectors $249.99
-255lph pump $132.00
-Poly motor mounts $69.95
[B]Attention[/B]: $850.00 is still owed to Allan Futral for blueprinting/balancing/assembly. If you want the motor, you understand that you must pay this $850.00. No, I will not pay it for you, so please do not ask or offer it as part of the trade. This would be ideal for someone local, as you could pick the motor up yourself. I really don't think I can deal with shipping a car and motor at this time, if you really want to, you'll have to arrange it all.
Obviously I will include the motor only for trades that are worth including the motor with. That doesn't mean I'm looking for something spectacular, it just means I wont give it away for a something like a 1999 stock silverado. Someone can potentially get a very good deal out of this and have a 520rwhp+ car for putting $850.00 out of pocket. Not to mention you could easily make that $850 back by selling the car's current short block which runs great and has an F-13 already in it.
If you are interested in trading, please send me photos of the vehicle to lsuxblake@gmail.com or link them in a PM. It's very difficult to be interested in something you cant see. If you want any more pictures of the car, let me know and I will take them and email them to you.
Last edited by LSUxBlake; Aug 4, 2006 at 03:09 AM.
Jul 14, 2006 | 01:21 PM
#3
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Jun 2004
Posts: 1,109
Likes: 0
From: Baton Rouge, LA
I've owned it for a year now, (put 7k miles on it) bought it after my WS6 disappeared 
The car was purchased by a dentist from Texas, he sold it to his good friend, who then sold it to me a year later.
The car was purchased by a dentist from Texas, he sold it to his good friend, who then sold it to me a year later.
Jul 14, 2006 | 02:38 PM
#4
Got a buddy looking for an ls1 car at the moment. Would you be interested in selling it outright? Man, I wish I would have left my truck semi-modded now so I could have made a deal with ya myself.
Jul 16, 2006 | 05:06 PM
#6
Interested. PM me with what you are looking to get for it to see if we match. I'm getting ready to sell my truck and this is what I'm interested in. I'll PM you with info on my truck.
