2008 RCSB 1500, 6/9 drop
#1
Well, it's time to sell my truck. I absolutely love it, but I just moved to Salt Lake City and, being a college kid, I'm naturally broke. I need money to ski this year, as that's why I moved here in the first place. Also, I need something more practical to drive back and forth to the mountain 5+times a week. KBB says 15,355 in good condition, so I'm going to start at 15,000 as that is roughly what is left on the truck. As my mom and I are still making payments on the truck, I won't have a title to give the buyer.
There are roughly 23,000 miles on the truck, but that will go up as I'm still driving it.
-DJM 4" arms
-Belltech Spindles
-McGaughy's Flip Kit and Shackles in the rear
-Blackbear tune
-Magnaflow "exhaust", 11226 muffler dumped after the cab
The truck runs awesome, it gets great gas mileage(I got 22 on the highway coming out here, cruise was on at 70 most of the time), and the ride is very good for a truck this low.
The only problems with the truck are occasional rubbing which could be fixed by getting slightly smaller tires diameter-wise, or raising the truck up about half an inch. The DJM arms combined with the spindle cause minor alignment problems- there is about half a degree of camber on each side, maybe less(I don't have the alignment sheet with me to check) and there is a slight pull to the right. This could easily be fixed by replacing the belltech spindles with the stock spindles and installing belltech drop struts. If you don't want the truck this low, I'll buy the belltech struts and lift it up 2 inches to a 4/7 for you.
I'm willing to fix the minor suspension problems if I get a good offer on the truck. I'm also willing to drive halfway or ship the truck at the buyer's cost as I realize that almost nobody on this board lives in Utah.
Pictures:



I'm really looking to get 15,000 for the truck, but I am looking for something 4wd, so if you want to trade, either PM me or post here and we can talk.
Thanks for looking!
There are roughly 23,000 miles on the truck, but that will go up as I'm still driving it.
-DJM 4" arms
-Belltech Spindles
-McGaughy's Flip Kit and Shackles in the rear
-Blackbear tune
-Magnaflow "exhaust", 11226 muffler dumped after the cab
The truck runs awesome, it gets great gas mileage(I got 22 on the highway coming out here, cruise was on at 70 most of the time), and the ride is very good for a truck this low.
The only problems with the truck are occasional rubbing which could be fixed by getting slightly smaller tires diameter-wise, or raising the truck up about half an inch. The DJM arms combined with the spindle cause minor alignment problems- there is about half a degree of camber on each side, maybe less(I don't have the alignment sheet with me to check) and there is a slight pull to the right. This could easily be fixed by replacing the belltech spindles with the stock spindles and installing belltech drop struts. If you don't want the truck this low, I'll buy the belltech struts and lift it up 2 inches to a 4/7 for you.
I'm willing to fix the minor suspension problems if I get a good offer on the truck. I'm also willing to drive halfway or ship the truck at the buyer's cost as I realize that almost nobody on this board lives in Utah.
Pictures:



I'm really looking to get 15,000 for the truck, but I am looking for something 4wd, so if you want to trade, either PM me or post here and we can talk.
Thanks for looking!
Thread
Thread Starter
Forum
Replies
Last Post
SLOPONY
GMT 800 & Older GM General Discussion
20
Oct 18, 2016 06:05 AM





