'01 Lightning. JDM longblock, Kenne Bell, built trans
Aug 4, 2006 | 09:51 PM
#1
Thread Starter
Teching In
Joined: Apr 2006
Posts: 2
Likes: 0
From: The AAV
'01 Lightning. JDM longblock, Kenne Bell, built trans
SOLD!!
Roughly 43k on the truck w/ approx 4k on the motor, trans, and blower. I don't know the exact #s until I get home.
Mods are as follows:
-Kenne Bell supercharger, 3.25 upper w/ JDM caged interchangeable lower currently sporting an "8 lb" ring
-JDM built longblock
-Pro Torque converter w/ built trans using LFP o/h kit and valve body, new OEM Ford planetaries and pump
-full exhaust w/ converters(Kook's/JDM longtubes w/ high flow converters, JDM silver bullet cat-back)
-60# injectors w/ an SCT Big air MAF
Suspension mods as follows:
-Ruslow rotors w/ ceramic pads(approx 4k on them. they were done while the truck was apart for the motor/trans install)
-Hotchkiss swaybars
-Hotchkiss rear leaf springs w/ adjustable shackles currently set on 1"
-DJM upper and lower 2" drop control arms w/ factory front springs
-Hotchkiss/Bilstein shocks all around
-I have all of the stock suspension to go with the truck if wanted.
Thats the majority of the mods off the top of my head as of right now.
This truck runs and drives awesome and I would not hesitate to drive it cross-country and back. This truck has never had a race tune on it and runs strong w/ 2 conservative tunes(1 warm weather, one cold weather). Best E.T. to date is 11.6@118.
This truck has been garaged most of it's life but was my daily driver at one point in time, so it is not perfect. The exterior has rock chips around the inner fender wells and could use a good detailing. Also, the truck picked something up in the road a couple months back. It damaged the lower part of the right front fender and inner well. I replaced the inner well, but the fender still has a crease in it. It is not noticeable just walking by, but is def. there. I can have a pic if desired.
The interior is stock w/ a column mount boost gauge. The drivers seat has the usual "*** wear" when guys like me drag their *** getting in and out.
pics from about a month ago:
This truck is in CT. $27,000 delivered to your driveway anywhere east of the Mississippi!
203-931-6178 or cel is 203-530-6247
I want to pay off some bills and purchase a home. Cash talks!
Roughly 43k on the truck w/ approx 4k on the motor, trans, and blower. I don't know the exact #s until I get home.
Mods are as follows:
-Kenne Bell supercharger, 3.25 upper w/ JDM caged interchangeable lower currently sporting an "8 lb" ring
-JDM built longblock
-Pro Torque converter w/ built trans using LFP o/h kit and valve body, new OEM Ford planetaries and pump
-full exhaust w/ converters(Kook's/JDM longtubes w/ high flow converters, JDM silver bullet cat-back)
-60# injectors w/ an SCT Big air MAF
Suspension mods as follows:
-Ruslow rotors w/ ceramic pads(approx 4k on them. they were done while the truck was apart for the motor/trans install)
-Hotchkiss swaybars
-Hotchkiss rear leaf springs w/ adjustable shackles currently set on 1"
-DJM upper and lower 2" drop control arms w/ factory front springs
-Hotchkiss/Bilstein shocks all around
-I have all of the stock suspension to go with the truck if wanted.
Thats the majority of the mods off the top of my head as of right now.
This truck runs and drives awesome and I would not hesitate to drive it cross-country and back. This truck has never had a race tune on it and runs strong w/ 2 conservative tunes(1 warm weather, one cold weather). Best E.T. to date is 11.6@118.
This truck has been garaged most of it's life but was my daily driver at one point in time, so it is not perfect. The exterior has rock chips around the inner fender wells and could use a good detailing. Also, the truck picked something up in the road a couple months back. It damaged the lower part of the right front fender and inner well. I replaced the inner well, but the fender still has a crease in it. It is not noticeable just walking by, but is def. there. I can have a pic if desired.
The interior is stock w/ a column mount boost gauge. The drivers seat has the usual "*** wear" when guys like me drag their *** getting in and out.
pics from about a month ago:
This truck is in CT. $27,000 delivered to your driveway anywhere east of the Mississippi!
203-931-6178 or cel is 203-530-6247
I want to pay off some bills and purchase a home. Cash talks!
Last edited by DOHC Holliday; Aug 18, 2006 at 01:16 AM.
Aug 4, 2006 | 09:52 PM
#2
Thread Starter
Teching In
Joined: Apr 2006
Posts: 2
Likes: 0
From: The AAV
Pics of the dent and the *** wear on the seat. Clean otherwise. Well, clean now at least, the carpet was a little dirty at the time I took these.
Make offers on this thing. I really would like it sold to free up some cash and space.
-jimmy
Make offers on this thing. I really would like it sold to free up some cash and space.
-jimmy
Thread
Thread Starter
Forum
Replies
Last Post
