went and made some pulls
Nov 10, 2008 | 08:11 PM
#1
went and made some pulls
I went to see a non-sponsor today to get my tune dialed in and cleaned up. If you want to know more details about who tuned it, let me know, he's a member here. Had a great experience and day with them, went to lunch and let the truck cool off and all... Anyway....
All runs were made on 6psi and no meth or nitrous...
Showed up and made some partial pulls dialing in A/F and fixing some of my screw ups lol.... Anyway, the first pull, it made an anemic 315 up to 5000rpm
After we got some things dialed in it made 440 the next pull and ended up with 457rwhp that was there at 5700rpm and stayed and didn't fall until 6200 and tq in the 470 range and flat as a table from 30000ish on up. With a 520ish tq spike at the end of the pull.... Anyway I'd consider it a successful day for sure. Not bad for a 130K mile 5.3 with just a lil ole 6psi....
Should easily break 500/500 on 9psi, that was my goal when I started this thing, should meet that and then some
Thanks go out to Kyle, everyone who's turned wrenches, ran wires, that guy who drives that badass white truck, his shop..... Yall know who you are
Ill scan and post up the sheet later. I'm at work now.
All runs were made on 6psi and no meth or nitrous...
Showed up and made some partial pulls dialing in A/F and fixing some of my screw ups lol.... Anyway, the first pull, it made an anemic 315 up to 5000rpm
After we got some things dialed in it made 440 the next pull and ended up with 457rwhp that was there at 5700rpm and stayed and didn't fall until 6200 and tq in the 470 range and flat as a table from 30000ish on up. With a 520ish tq spike at the end of the pull.... Anyway I'd consider it a successful day for sure. Not bad for a 130K mile 5.3 with just a lil ole 6psi....
Should easily break 500/500 on 9psi, that was my goal when I started this thing, should meet that and then some
Thanks go out to Kyle, everyone who's turned wrenches, ran wires, that guy who drives that badass white truck, his shop..... Yall know who you are
Ill scan and post up the sheet later. I'm at work now.
