Anyone impressed with this engine?
#31
Custm2500's Rude Friend
iTrader: (17)
Sorry, I don't have the spec's on the engine but I have been told those are the smaller turbo's.
I also know the X-ram design intake has made more power than any other manifold he tested...
Also look at where the max Torque is on that set up... Should be interesting on a road course..
I skimed through the Video and he mentions Tuned by Tad, also looks like HPT software. I have never heard of the guy doing the tuning.
I would like to see what it does in the car with someone else tuning it.
I also know the X-ram design intake has made more power than any other manifold he tested...
Also look at where the max Torque is on that set up... Should be interesting on a road course..
I skimed through the Video and he mentions Tuned by Tad, also looks like HPT software. I have never heard of the guy doing the tuning.
I would like to see what it does in the car with someone else tuning it.
#32
Yea I'm sure we will see the engine installed in the car but not much after that besides some burnouts. Would be cool to see the car on the chassis dyno and some 1/4 mile runs. Is there a vid where he tests the manifold vs others on the market? There really isn't anything else out there to test it against is there?
#33
Custm2500's Rude Friend
iTrader: (17)
Yea I'm sure we will see the engine installed in the car but not much after that besides some burnouts. Would be cool to see the car on the chassis dyno and some 1/4 mile runs. Is there a vid where he tests the manifold vs others on the market? There really isn't anything else out there to test it against is there?
I know he has a bench mule engine that he flogs the **** out of. He said he was able to get more power with that manifold design.
My guess would be that its feeding the banks more efficiently Vs. a traditional intake.
#35
Custm2500's Rude Friend
iTrader: (17)
He didn't post the result online if thats what your asking. It was a conversation I Had as I wanted to use a Holley High ram for a build.
My understanding is they used 1 motor and tried several different intakes for testing. I believe they even changed cams to test different RPM ranges and efficiency.
Thread
Thread Starter
Forum
Replies
Last Post
superchomper2003
GM Drivetrain & Suspension
3
08-26-2015 09:39 AM
GMCtrk
Tuning, Diagnostics, Electronics, and Wiring
38
08-09-2015 08:50 PM