It is a brand new gm iron 6.0 block std bore, weisco pistons, same stock crank and same rods from the old engine. We bought a brand new ls3 head and installed it along with a stock ls3 camaro cam shaft and new ls7 lifters. The other head got a new valve job, the rotating assembly got rebalanced, with clevite bearings and all new gm gaskets. Also the turbo took a **** so we replaced it with a brand new borg warner 66mm turbo and replaced the return line for the turbo with a larger -10 line. I am wanting to say it make around 600 rwhp as it sits (10-12 lbs I think) but I will have to check tuesday when I get to the shop to confirm.

It is a badass truck, couple of us at the shop were all wanting to buy it!! haha

 

X2 ^ Tobey? If i think u worked on my truck
Did a cam swap pkg that i took to u guys.

you did a great job and along with shawn with Tune

my buddy was telling about this truck on Fri also
Down there wanted to buy it

 

Yup that's me. Glad to hear you are enjoying it! You been to the track since the swap?

 

Ive been wanting to go im working on my 4/6 drop and sway bars. I'll take it
Before i order Dconverter 3600 and stg 2 heads and nitrous are my plans.

I dont drive the truck but once a week and around town i smash on a new
13 single cab R/T several weeks after install from red light roll 20 pulled 2trucks

 

Very cool, let me know before you order the heads, I know a guy that is a badass porter that can do them for you. Also I have a nitrous kit I may be selling soon. It's a nitrous outlet wet shot with msd window switch.

 

ill drop by the shop or send u a pm when im near of doing it

Thanks!