Trade 4.10ed rear for a 3.23ed rear
Dec 9, 2006 | 09:15 AM
#2
12 Second Truck Club
Joined: Nov 2005
Posts: 1,451
Likes: 0
From: Jackson, MS
I have a 3:73 If you need one. The only difference is the outer bearings. You can use any 8.5 inch GM rear end you just need to need to change the outer carrier bearings. I am running a set of gears from a 2004 in my 1991. All I had to do is swap those outer bearings.
Dec 9, 2006 | 09:39 AM
#3
TECH Junkie
Joined: Jul 2005
Posts: 3,205
Likes: 0
From: Lake Conroe Texas
Originally Posted by Dock Rocker
I have a 3:73 If you need one. The only difference is the outer bearings. You can use any 8.5 inch GM rear end you just need to need to change the outer carrier bearings. I am running a set of gears from a 2004 in my 1991. All I had to do is swap those outer bearings.
Where the hell were you for THIS thread??
Trending Topics
Jan 30, 2007 | 09:39 AM
#8
Teching In
Joined: Jan 2007
Posts: 3
Likes: 0
3.23 trade
I have been looking all over for a gear upgrade, have found some "new" OEM replacement rear ends but they are a bit pricey.
How many miles on yours?
Do you still have it?
Mine is in a 2wd crew with 3.23 and 25k miles, mostly highway, never raced (not yet anyway..
)
How many miles on yours?
Do you still have it?
Mine is in a 2wd crew with 3.23 and 25k miles, mostly highway, never raced (not yet anyway..
)
