Chevy broke....Hemi to the rescue??????
#12
Originally Posted by TouchOfEvil04
It was the Hemi guys trailor and all. You have a trailor for my big *** truck?
If so i'll call you next time. Yea i know i said next time lol.

If so i'll call you next time. Yea i know i said next time lol.

#13
Originally Posted by Nick™
won't take but a minute to swap my tow hook to the front of your truck and I'll pull you on your wheels... done it enough times with Matt's 

#14
Originally Posted by Nick™
won't take but a minute to swap my tow hook to the front of your truck and I'll pull you on your wheels... done it enough times with Matt's 

#15
Originally Posted by TouchOfEvil04
Mine does nothing in any gear and it sounds like valve train noise coming from the tranny. How bad is it to have a spun bearing and would it sound like a loud valve train noise coming from the tranny?
I'm hoping this is an easy fix cause money is getting tight!!!

I'm hoping this is an easy fix cause money is getting tight!!!

Thats what it sounded like when my pump took a ****. I found vanes all the way in the filter. If thats what happened I recommend a good rebuild and flush the converter. Not trying to down your builder, but isnt this the 3rd time its blown?
#16
Originally Posted by VicRed
Thats what it sounded like when my pump took a ****. I found vanes all the way in the filter. If thats what happened I recommend a good rebuild and flush the converter. Not trying to down your builder, but isnt this the 3rd time its blown?
The second time i am fairly certain that out of wack driveshaft caused it to break the output shaft as i'm not making enough power to break it.Thats also the same part that broke while the tranny was stock and the driveshaft was neer touched during any of that time.
This time around if it's just a pump that went it's not really his fault as a pump can fail from high line pressure.Just how it is ya know.
My pressure was high too.High enough to bark a mean second at quarter pedal. I aksed Allen to lower and he did only he didn't lower it enough and he never did anything else to my tune since then.Just got the ok well we'll see ya later then every time i went by his shop.
I don't know for sure thats what caused it but it's a good chance it is.
Ethier way once it's apart tomorrow i will know for sure that the pump is what went out and so long as thats what went it won't cost me anything which the part that i really care about the most.
Thread
Thread Starter
Forum
Replies
Last Post



