2018 LTZ Z71 Redline 6.2/8 speed
#11
700 miles so far. Average of 18.7 mpg this tank with about 160 miles on it. No thruway.
Scheduled my first oil change. I want to cut the filter apart for inspection.
AC is not cold at all.
Trans flares between shifts when reg driving. Feels fine WOT. Not sure if this is supposed to drive like this or not.
Scheduled my first oil change. I want to cut the filter apart for inspection.
AC is not cold at all.
Trans flares between shifts when reg driving. Feels fine WOT. Not sure if this is supposed to drive like this or not.
#13
Dealer called me back
Oil looks good and kept the filter for me
AC Condenser blew up and they are replacing it
Trans is acting normal. "It adapts to your driving over time" which i was thinking i did a dozen 1/4 passes, babied it for 400 miles to get a MPG idea, many burnouts.... good luck adapting to that LOL
Oil looks good and kept the filter for me
AC Condenser blew up and they are replacing it
Trans is acting normal. "It adapts to your driving over time" which i was thinking i did a dozen 1/4 passes, babied it for 400 miles to get a MPG idea, many burnouts.... good luck adapting to that LOL
#16
I’m an assistant parts manager at a Chevy dealer and the 14+ are notorious for condenser problems. Right now it’s kind of hard to condensers due to GM trying to get the problem sorted out and they keep releasing new part numbers
#18
First race Truck mod is a RX monster can. Install was pretty easy but the clean side separator is a bit tight when installed to the stock air lid box. I suggest not drilling the hole where I did. Install the barb on the top or on the bottom farther away from the TB than where there is a bit more meat. The paper towel was the oil I cleaned out of the intake. The truck has 900 miles.
#19
I feel a viberation in the gas pedal anytime the rpm is around 1000. The dealer did scan the transmission but I don’t believe they changed any settings. Def rpm related.
Wired the flapper valve open this morning too. It has a little throaty sound at low rpm now.
Wired the flapper valve open this morning too. It has a little throaty sound at low rpm now.