Sounds like he had a verus wireless. Pro is still good to go.

 

Thought i had posted this before but i had to realign the front end, added more caster and after the new struts settled and everything ekse started settling i needed to readjust the toe too


Think i may go back and add some more caster and bring the camber out a hair...had an 08 sulverado i aligned the other day with basically the same lift and a set of 37" nitto claws, and was really happy with the way the alignment turned out and how it drove afterwards. Actually put caster up around 3.7/4.0 and the camber at -.3 or -.4 and got it to where the worn outer edges i could see daylight under them on the plates, which was how i had to align my silverado to get it to stop wearing the tires!

 

Hey youre a snap on dealer, right? Got a question for ya, the verus had a setup you could get that included a roll cart the foam inserts and if i remember correctly came with a monitor/tv mounted in the lid, do you know what size monitor that was? I have the cart and want to get the rest of the foam inserts and put the monitor in it, for various reasons!! Also what mount did that take?

 

Im sure i can find a part number for the mount. You could use any size monitor you want.

 

The demo my dealer had fit the lid perfectly, kicking myself for not getting the full setup then, when they had the deal on it for like $3000 extra or whatever it was....now i get to piece it all together!!

 

Had the wireless verus.

I have the foam kit too. sold the cart

 

KRCS46 cart?

 

Need to look up the number on the cart, it was the big one, that had two different drawer setups that i have seen one was 4 smaller drawers and 1 twice the size, and another that was used with the verus kit that had one big *** deep drawer the printer lived in and then 3 drawers taht the adaptors and everything ekse went in...

 

Krsc40, at least that what the descriptiom of the foam insert comes up as.

 

My cart was a KRCS46A

I believe I had the 3 piece foam insert set in it. I removed it when I sold the cart along with the cover. It was only a few months old when I took my current job and it sat basically in the house ever since.