PerformanceTrucks.net Forums

FORCED INDUCTION Turbos | Superchargers | Intercoolers | H2O/Meth Injection
Sponsored by:
Sponsored by:

Lsa swap what intercooler pump did you use

Thread Tools
 
Search this Thread
 
Old Nov 18, 2016 | 06:00 PM
  #21  
GM1697's Avatar
GM1697
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default
Originally Posted by musclecity85
these were the other 2. im not sure if these are right either. how would you recommend routing the hoses?
The second one, "norcal box" being your tank. Just make sure the line coming from top of blower goes into the upper fitting on your tank, and then lower port on the tank would feed the pump.
Reply
0
Old Nov 18, 2016 | 06:20 PM
  #22  
musclecity85's Avatar
musclecity85
TECH Apprentice
iTrader: (5)
 
Joined: Feb 2009
Posts: 350
Likes: 5
From: columbia SC
Default
Originally Posted by GM1697
The second one, "norcal box" being your tank. Just make sure the line coming from top of blower goes into the upper fitting on your tank, and then lower port on the tank would feed the pump.
thanks..ill check that out and re route my lines tomorrow
Reply
0
Old Nov 18, 2016 | 06:26 PM
  #23  
GM1697's Avatar
GM1697
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default
Originally Posted by musclecity85
thanks..ill check that out and re route my lines tomorrow
No problem, take pics if you are confused.

Proper routing will absolutely help your IAT's
Reply
0
Old Nov 19, 2016 | 04:32 PM
  #24  
Lt1z383's Avatar
Lt1z383
Thread Starter
Staging Lane
 
Joined: Oct 2016
Posts: 63
Likes: 2
From: Fl
Default
Spent some of today mounting exchanger






Reply
0
Old Nov 19, 2016 | 05:03 PM
  #25  
GM1697's Avatar
GM1697
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default
Looks good, but I doubt that HEX cap will be the highest point in the system.

Originally Posted by Lt1z383
Spent some of today mounting exchanger






Reply
0
Old Nov 19, 2016 | 06:21 PM
  #26  
Lt1z383's Avatar
Lt1z383
Thread Starter
Staging Lane
 
Joined: Oct 2016
Posts: 63
Likes: 2
From: Fl
Default
Your right not gong to use it. Going to get a tank like u recommended and mount in spare battery space. Pump should be lower then hx correct? Mounting that and hoses tomorrow.
Reply
0
Old Nov 19, 2016 | 06:42 PM
  #27  
Vortec350ss's Avatar
Vortec350ss
Moderator
iTrader: (20)
 
Joined: Feb 2006
Posts: 7,271
Likes: 62
From: South Shore, MA
Default
Pump does not need to be lower than the HEX, just lower than the tank that feeds it.
Reply
0
Old Nov 19, 2016 | 07:46 PM
  #28  
turboal1's Avatar
turboal1
TECH Enthusiast
 
Joined: Nov 2010
Posts: 672
Likes: 11
Default Water flow
For street use the 1st of you 2 pics is the right way
Reply
0
Old Nov 19, 2016 | 07:49 PM
  #29  
GM1697's Avatar
GM1697
Moderator
iTrader: (1)
 
Joined: Oct 2014
Posts: 1,568
Likes: 12
From: in MA or SC
Default
Originally Posted by turboal1
For street use the 1st of you 2 pics is the right way
The two he posted are actually identical.
Reply
0
Old Nov 20, 2016 | 11:54 AM
  #30  
Lt1z383's Avatar
Lt1z383
Thread Starter
Staging Lane
 
Joined: Oct 2016
Posts: 63
Likes: 2
From: Fl
Default
So the second set of pictures are correct? The box being the tank we use.
Reply
0



Advanced Search

All times are GMT -5. The time now is 06:20 AM.