Yes V2 S484. Must be when they cut the 88's they went to a 7+7 from a 6+6.

 

My build is very similar to yours .I am on the brink of bailing on my build and selling off all my parts
Turbos in picture are
Work 82/88mm borg Warner turbo smaller one is a pt88mm

 

i got my trans rebuild in today minus the intermediate shaft. I have to say im a bit overwhelmed at this point...there's a **** load of parts and no directions lol Ill be watching a youtube video again tonight to refresh my memory.

 

Why does that turbo still have the noise attenuator in it? Decreases performance

 

Its a work turbo ,I haven't run it but if I do I will settle for 800hp lol

 

Taking the wire wheel to the case today. Also found a local guy that use to build for jakes performance (confirmed) that is willing to come to me and build the trans so definitely jumping on that offer! Anyway here are the pics. Still got some work to do but not bad for 10 mins and a wire wheel. The right side is the after

 

Just make sure the pieces of that wire wheel that went flying off didnt find their way in the rest of the trans parts!!!

 

Lol I thought about that when I finished...I'll clean them before the trans is rebuilt

 

if its snipes from ls1 tech he is dam good and very reasonable .he built my bothers over a year ago and hasn't missed a beat.

 

Yea that's him! When I get a weekend off he is going to come and take care of the build for me