what size trick race intercooler is that ?

 

any pics of the engine bay to show the piping on the kit? I have the same one but haven't installed it yet

 

Thanks its coming along slowly!!!
As for the intercooler its tricks stage 3 if I recall correct.
Needs some trimming on the bumper the 2 metal labs need to be cut off to clear.

 

Its pretty simple to install I had a hard time finding pic of this and how to install it myself but its straight forward. I would say install the intercooler then go from turbo to intercooler then its just 2 pieces form the intercooler to intake.
Pics are not the best but should give you some sort of idea.

 

Some more parts I gathered
-hp tuners pro
-ait sensor
-3 bar map

And have stared playing with hp tuners.
Trans is done will be installed next week I'm hoping for.

 

Got a new muffler for the truck today its a jones max flow with some stainless pipe.
hopefully it sounds good!
It looks free flowing.

Also the truck is gone getting the new trans and drive shaft 4" , trans cooler installed some wiring done on it and then I decided to get a line lock as well.
once that's done ill be getting the fuel system ordered up I hope!

Was working on the bed today doing a tub to it.
Looks like I got a rotterado!!!
Its not bad but still something I have to fix now.

 

Bunch of stuff on the way.
Fuel system that was in my fuel system advice posts thanks guys for helping with that.
Got everything ordered for the 4 link that's on the way.
trans temp gauge.
Cheetah shifter in with the trans cooler mounted up under the box right behind the cab.

Going to be doing some painting on the truck rear box rust fix while I'm at it I cut out the rear tubs and got new big ones on the way so its going to be ready for a tub when the time comes.. New paint gun devillbiss copper pics will be coming.

 

Ok so I have been getting some more parts together and today a bunch came in so figure I will show whats happening!
-meth tank
-4 link parts
-new ss bumper cover but going to make some mounts for the cover a see if I can mount just the cover, would like a hd hood also eventually
-air to water cooler with pump and tank 2000hp rating. This is for the future I got a good deal on it and could not pass it up
- wheel tubs!!!


Truck is gone getting trans put in should be dune soon I hope.
He are some pics

 

Sway bar on order with the qa1 shocks and 200lb springs
diagonal mount coming.
fuel system is also coming!
Hopefully when i get the truck back I can get to work on it!!

 

She's moving right along. One day I'll have the time/money to do a real build instead of piecing it together over years.