SHOW & SHINE DISCUSSION Appearance | Detailing | Wheels | Truck of the Month
Sponsored by:
Sponsored by:

What kind of Clear Corners??

Old Nov 12, 2004 | 11:32 AM
  #1  
ABeasst's Avatar
Thread Starter
TECH Fanatic
iTrader: (5)
 
Joined: Oct 2003
Posts: 1,416
Likes: 0
From: North Carolina
Default What kind of Clear Corners??

What kind of clear corners is everyone running? any problems with leaking? I have RK sports on my camaro and they leak real bad.

thanks
adam
Reply
Old Nov 12, 2004 | 11:46 AM
  #2  
xXxSilveradoxXx's Avatar
TECH Addict
iTrader: (5)
 
Joined: Apr 2003
Posts: 2,056
Likes: 0
From: Willows, California
Default

I have the APC clear corners and have had them for two years. I have had no leaking problems but dirt and water have got in a lip that is around the light. It's hard to explain, I'll get a picture up later today. The have turned yellow though .
Reply
Old Nov 22, 2004 | 09:29 PM
  #3  
creederado's Avatar
TECH Fanatic
 
Joined: Feb 2003
Posts: 1,295
Likes: 0
From: NY
Default

Originally Posted by xXxSilveradoxXx
I have the APC clear corners and have had them for two years. I have had no leaking problems but dirt and water have got in a lip that is around the light. It's hard to explain, I'll get a picture up later today. The have turned yellow though .

Mine turned yellow too. I soaked them with oxyclean, etc, with neg results.

I'm running Matrix euros know. My signal light sockets were a bitch to get in and don't seal too well. So far know yellowing though. But theres always something. Somethings in the aftermarket will always be junk.

I'm running TYC in my Sierra. Very nice quality. No complaints. But ofcoars there's a catch; they don't make a completly clear lense for the Silverados. They still have a little reflector in them.

Go figure. These ar ethe elgantes;
This is not my Truck.


Heres mine with the GMC elegantes;


Heres the Matrix lenses on My Silverado;


Another Brand I never have seen in person is the In pro car wear but havn't heard too much about them.
Reply
Old Nov 23, 2004 | 11:34 AM
  #4  
blue 01's Avatar
TECH Regular
iTrader: (1)
 
Joined: Mar 2004
Posts: 475
Likes: 0
From: oregon
Default

Ebay, no brand name. Got them for $25.00. No leaks or yellow so far. I have them a little over six months.
Reply
Old Nov 23, 2004 | 11:46 AM
  #5  
Scream's Avatar
MOOBIES Moderator
iTrader: (6)
 
Joined: Apr 2002
Posts: 4,924
Likes: 1
From: Jacksonville, FL
Default

I think mine are In Pro Car Wears, but I'm not sure. Got 'em off of eBay almost 4 years ago--they're slightly yellowed, but not enough to notice unless you're REALLY looking closely.
Reply
Old Nov 23, 2004 | 02:24 PM
  #6  
lxcoupe's Avatar
TECH Fanatic
iTrader: (9)
 
Joined: Nov 2004
Posts: 1,127
Likes: 22
From: California
Default

I have APC's on mine, and they have yellowed - they look TERRIBLE.

I am in the market for replacements. Any suggestions???

I would be willing to go back to stock over these APC pieces of sh*t!!
Reply
Old Nov 25, 2004 | 01:12 AM
  #7  
nekkid_hill_billy's Avatar
Launching!
 
Joined: May 2004
Posts: 241
Likes: 0
From: hazard ky
Default

Originally Posted by blue 01
Ebay, no brand name. Got them for $25.00. No leaks or yellow so far. I have them a little over six months.
ebays are made by anzo www.anzousa.com 1 yr no leaks no color change procarparts carry em too but are cheaper from ebay
Reply
Old Nov 25, 2004 | 10:42 AM
  #8  
CHAGO's Avatar
TECH Senior Member
iTrader: (1)
 
Joined: Mar 2002
Posts: 5,541
Likes: 0
From: Northwest Houston
Default

Originally Posted by nekkid_hill_billy
ebays are made by anzo www.anzousa.com 1 yr no leaks no color change procarparts carry em too but are cheaper from ebay
procarparts.com sells a lot on ebay
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Alco
GM Drivetrain & Suspension
7
Jul 20, 2016 04:53 PM
RustyD
8-Lug Truck Performance
4
May 23, 2016 07:04 PM
cheyenne383
GMT 800 & Older GM General Discussion
9
Nov 13, 2015 09:24 AM
JordanH
WTB (Wanted To Buy)
4
Nov 6, 2015 07:42 PM
KINGCYCLES
GM Parts Classifieds
1
Oct 2, 2015 10:21 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:47 AM.