twin turbo 427 silverado detail
Oct 18, 2010 | 03:07 PM
#1
Thread Starter
Staging Lane
Joined: Feb 2009
Posts: 98
Likes: 0
twin turbo 427 silverado detail
like most of you may already know, i have detailed many cars/trucks for SYNERGY MOTORSPORTS, so when it came for this truck to get a detail, rick contacted me to check out the truck. upon my inspection rick and myself came to an agreement that this truck will recieve my basic detail package. this truck was in fairly good condition, basicly it was just dusty and in need of a nice coat of sealant.
basic process:
1.dawn presoak via foam gun(removes old waxes)
2.clay bar entire truck using GRIOTS medium clay bar
3.performed 2nd wash using dawn again to remove all clay bar residue
4.dried truck using microfiber towels
5.applied wolfgang paint sealant by hand
6.let sealant set for about an hour (while rick and i hit up the local deli)
7. vacuumed truck and performed a complete interior wipedown
8.cleaned wheels and dressed tires using a water based dressing
9.after removing the hazed up paint sealant i wiped down the truck using a P&S final touch detail spray.
enojoy!
I DIDNT GET ANY PICS OF THE FINISHED CUSTOM TURBO INSTALL, BUT YOU GET THE IDEA!
IF YOU HAVE ANY QUESTIONS ABOUT SETTING UP AN APPOINTMENT FOR A DETAIL, FEEL FREE TO SEND ME A PM.
basic process:
1.dawn presoak via foam gun(removes old waxes)
2.clay bar entire truck using GRIOTS medium clay bar
3.performed 2nd wash using dawn again to remove all clay bar residue
4.dried truck using microfiber towels
5.applied wolfgang paint sealant by hand
6.let sealant set for about an hour (while rick and i hit up the local deli)
7. vacuumed truck and performed a complete interior wipedown
8.cleaned wheels and dressed tires using a water based dressing
9.after removing the hazed up paint sealant i wiped down the truck using a P&S final touch detail spray.
enojoy!
I DIDNT GET ANY PICS OF THE FINISHED CUSTOM TURBO INSTALL, BUT YOU GET THE IDEA!
IF YOU HAVE ANY QUESTIONS ABOUT SETTING UP AN APPOINTMENT FOR A DETAIL, FEEL FREE TO SEND ME A PM.
Oct 18, 2010 | 03:13 PM
#2
FormerVendor
Joined: Nov 2004
Posts: 1,134
Likes: 1
From: Boulder, Colorado
Hmmmm... looks familiar 
I'll be putting my touch on it once Chase finally gets it back down here... much love for sealing it up I'm sure you just made my job a lot easier when I finally get a crack at it.
I'll be putting my touch on it once Chase finally gets it back down here... much love for sealing it up I'm sure you just made my job a lot easier when I finally get a crack at it.
Oct 18, 2010 | 03:19 PM
#3
Oct 18, 2010 | 04:35 PM
#6
Thread Starter
Staging Lane
Joined: Feb 2009
Posts: 98
Likes: 0
Trending Topics
Oct 18, 2010 | 08:47 PM
#10
for those who havent seen this truck before(dont know how that could've happened) it belongs to one of our members from down here in SoCal. goes by 2004SSS(Chase) real cool guy and this thing was a beast before with an 11.1 in the 1/4 but now it should be a whole different monster. should be back down here in a couple weeks, he's going up north to pick it up at the begining of nov.
here's his build thread, for those who havent had the pleasure of reading up on it!!! here ya go: https://www.performancetrucks.net/fo...d.php?t=435934
-Rob