Pics of my tird..........
#7
Moderator
iTrader: (19)
has it ever been wrecked? that bumper is hangin pretty low on the passengers side and way low on the drivers
theres an "L" bracket on each side of the bumper if you lay down and look under there. put a jack on that bracket and jack it up little by little until the bumper sits where its suposed to. i had to do that with mine after the fender bender.
then if it sits too far back afterwards, take off your valance and wrap a cable around a big tree and that same bracket and put it in reverse and back up *SLOWLY*. if that bracket breaks(not likely) it could tear your bumper off. I parked on a steep driveway and drove up, put it in neutral and let it rock back a few times and it came out perfect.
it seems kinda scarey but thats the kind of stuff that happens at the body shop when you wreck a car. its scary to watch those guys pry and pull metal back to where its suposed to be.
theres an "L" bracket on each side of the bumper if you lay down and look under there. put a jack on that bracket and jack it up little by little until the bumper sits where its suposed to. i had to do that with mine after the fender bender.
then if it sits too far back afterwards, take off your valance and wrap a cable around a big tree and that same bracket and put it in reverse and back up *SLOWLY*. if that bracket breaks(not likely) it could tear your bumper off. I parked on a steep driveway and drove up, put it in neutral and let it rock back a few times and it came out perfect.
it seems kinda scarey but thats the kind of stuff that happens at the body shop when you wreck a car. its scary to watch those guys pry and pull metal back to where its suposed to be.