Belltech has finnaly came out with a new spindle that will allow you to drop your truck with out spending alot of money and getting into alot of work.
This spindle kit will work with the stock balljoints, all you do is remove the stock spindle and install the Belltech drop spindle. This sale will go untill the end of the mounth, and will make super deals on any other Belltech parts!!

2" drop SPINDLE $199.95

NOTE: This spindle will also work on tahoes, & suburbans.
(WILL NOT WORK ON 4X4)

 

What about turning radius? Do these new spindles still increase your turning radius like the unit they replace?

 

do you still have to flip the upper control arm upside down

 

Do they wear the balljoints Prematurely like some others?
Turn radius??

 

Sorry to take so long to post back on this thread, it's been crazy . I just got off the phone with the tech manager at Belltech, and I asked him all the questions you guys have posted:

Tuning radius? Stays the same as if you had stock spindles.

Do you have to flip the upper control arm? All other suspension on the truck stays in the stock location. You do not have to flip anything!!

Do they wear the ball joints pre mature? No, there is no reason for the spindle to cause pre mature wear. Coil springs can make that happen if the spirng is so short that it causes the ball joint to be at a bad angle.

 

Are these the same spindles that are on your site for 370.00? If so, are u really selling them for 200.00? Please let me know, I have had Belltech stuff for a long time and been noting but pleased with their stuff.

 

The new spindles are not on the site yet, but will be soon!! This kit is cheaper because you don't need the high dollar ball joint kit. Plus I think Belltech realized that the other spindles were not only a pain in the but, but over priced!!

 

Ahhhh just in time too, my buddy just bought his 2000 GMC RCSB 2 weeks ago and he was about to get the old spindles. I told him i saw this up and he gave me the money to order them today. Looks like i'll be giving yall a call, do i need to mention the site....or is this a all around discount? Plus, are yall doing any other deals on the rest of the Belltech parts? He's also going to need something for a 4" drop in the rear....but it will probably be a while before he has the money for it.

 

Sorry to take so long to reply!! Just give me a call 7 I will get you set up. As for the other parts he needs, we will give the best deal we can!!

 

Damn wish they would've had these last summer when I bought a McGaughy's kit and spent HOURS drilling out those damned ball joints to flip them...