lowered the Z71
#13
TECH Apprentice
iTrader: (1)
Join Date: Mar 2005
Location: Lakeland Fl
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Black02Z71
Oh don't worry they will be gone soon, the side moulding too. Once the Z71 stickers are gone, hopefully everyone will stop asking me why I would lower a 4wd truck.
#15
12 Second Truck Club
iTrader: (5)
Join Date: Apr 2005
Location: Sittin on jackstands
Posts: 5,230
Likes: 0
Received 4 Likes
on
2 Posts
Damnit you bastard. I dropped mine 2" in the back, and leveled out the front, it needs to be lower, but I wasnt gonna do it, now I see yours and I HAVE to do it. Could you let me know where you got the keys from, and about how mutch they cost. I was thinking you could only get the lowering keys in a kit.
#17
TECH Apprentice
Thread Starter
Join Date: Mar 2004
Location: Ontario, Canada
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
In the front I used Belltech keys #3921, $108.39 from Summit racing.
At first I installed the keys and set the adjusting bolt to the factory position, and got a good 2" of drop, then I backed them out 7 turns. I think I might try turning them back in two turns, and see if it rides better. Not that it rides bad, but I think the jounce bumpers are doing a lot of the work right now.
Also that exhaust, I built it myself a couple weeks ago https://www.performancetrucks.net/fo...ight=magnaflow
At first I installed the keys and set the adjusting bolt to the factory position, and got a good 2" of drop, then I backed them out 7 turns. I think I might try turning them back in two turns, and see if it rides better. Not that it rides bad, but I think the jounce bumpers are doing a lot of the work right now.
Also that exhaust, I built it myself a couple weeks ago https://www.performancetrucks.net/fo...ight=magnaflow