Stampede4ever

Post pics if you have them.

Thanks.

custm2500

iTrader: (10)

Mine isn't as drematic as others and that is because it isn't done yet. The rears are 38x11.50-16s and the fronts are 215x70r16(around 6"s wide) on 4" narrowed wheels. I never got around to buying the 4" front runners this year because I kept having tranny problems and only went to the track twice. Next year I will have the front runners, and the widend rear wheels(6.5" made into 8") I only have one widened wheel for the rear and again with out making it to the track this year I didn't have any reason to do the other wheel. Anyhow onto the pic.

double047

iTrader: (15)

Thanks custm2500.

Let's see more pics...

454navyss

iTrader: (46)

28x11.5x16 maybe?

StrokerAce03

iTrader: (7)

Here's mine, not the usual but its what I use:

silver-mod-o

iTrader: (15)

Is it just me or is your bed not on straight??? The body lines don't match up... Looks like my truck right now with a bent rear frame section

JFOLM

iTrader: (8)

He did convert it from LWB to SWB. . .

skeet

iTrader: (18)

custm2500

iTrader: (10)

The factory bed was off just a tiny bit and this bed is the same. I am going to take1/4" or so out of the bed mounts so that everything lines up properly. It is just one those Chevy things how not everything is perfect. I have looked and tons of trucks are miss-aliened just like mine is. I doubt your frame is bent unless you know it is for sure. Like I said thousands of GMC/Chevy trucks look just like mine with the bed a touch hier then the cab.

Yes I did shorten the truck. If you are thinking that is why it don't line up it isn't. I didn't cut the frame in the middle. I just mounted the 4 link further up the frame and cut off the back of the frame.

JFOLM

iTrader: (8)

It never gets old.