Coolest crew cab interior mod yet!
#1
Coolest crew cab interior mod yet!
I always loved the idea of quad bucket seats in a crew cab, and I finally made that happen this weekend.
I'm not a fan of aftermarket interior parts. A different leather seat skin is one thing, that I like, but actual custom interior parts I find more often than not to be tacky.
I was able to track down some buckets from an 05 Yukon Denali XL that match my interior, and the last piece of the puzzle was the console. I was able to find one this weekend that seemed to be close enough to the right color.
The seats alone keep it nice and snug, but I had to make a bracket to raise the front a little and secure it a little more.
And there is a JL Audio stealth box inside the console that I will be wiring up with a 10" W3 to give the stereo system a little more guts. The Factory LUX stereo is pretty good, but I think this will add just enough without overpowering the speakers.
Next on the interior project list is to hook up the heaters in these rear buckets. I need to figure out exactly where I will mount the factory switches.
I'd like your feedback. Should I try to move the console at all? Is it too high? Too low? Too far forward? Also, I was debating the console lid from a Denali since it will be leather wrapped etc... but I'm not sure it will fit.
Let me know what you think!
I'm not a fan of aftermarket interior parts. A different leather seat skin is one thing, that I like, but actual custom interior parts I find more often than not to be tacky.
I was able to track down some buckets from an 05 Yukon Denali XL that match my interior, and the last piece of the puzzle was the console. I was able to find one this weekend that seemed to be close enough to the right color.
The seats alone keep it nice and snug, but I had to make a bracket to raise the front a little and secure it a little more.
And there is a JL Audio stealth box inside the console that I will be wiring up with a 10" W3 to give the stereo system a little more guts. The Factory LUX stereo is pretty good, but I think this will add just enough without overpowering the speakers.
Next on the interior project list is to hook up the heaters in these rear buckets. I need to figure out exactly where I will mount the factory switches.
I'd like your feedback. Should I try to move the console at all? Is it too high? Too low? Too far forward? Also, I was debating the console lid from a Denali since it will be leather wrapped etc... but I'm not sure it will fit.
Let me know what you think!
Trending Topics
#8
11 sec. Truck Mod
iTrader: (12)
You have a house you don't need a bed in the back lol.
Looks great Rob , the rear bench seat in the classic crew cab trucks are terrible, and of a poor design for comfort and room . Buckets in the back look soo much better.
I ran a JL 10 in my dmax , complimented the factory Bose quite nicely
Looks great Rob , the rear bench seat in the classic crew cab trucks are terrible, and of a poor design for comfort and room . Buckets in the back look soo much better.
I ran a JL 10 in my dmax , complimented the factory Bose quite nicely