I had one of these grills on a 95 S10, Either it got stollen or it fell out. So on this truck I bolted it on. I just used some washers and drilled in to the grill. The clips just did not work right!

 

Here is a pic of my truck

Whistlin00: http://www.intergate.com/~jet2k/LS1...s/Image052.html
(probably a bad pic)

 

Link does not work

 

The hood is made by extreme fiberglass products, there isn't any cracking problems but the passenger side gap is a little wider than I would like it. It still has a little more wet sanding to be done on it by the nostril openings so I am going to split the difference when I take the hood back off. Other than that it looks pretty good.

 

"The hood is made by extreme fiberglass products"

Do you know if they have a website? Also, how much was it? Does it come with everything and is it functional?

 

Street scene speed grille with a Tahoe chrome grill and a billet bowtie

 

It comes with hood, latch and mounting bolts. Comes with nostrils closed but are easily cut open. As far as functionality, it doesn't have a kit like the goodhoods do but it could be made ram air easily with some fabrication. I am going to remove my intake tube and have my filter come straight out of my throttle body then fab up some sheet aluminum and rivet it all together to make an enclosed air box. Add some rubber *** gasket and make it conform to the hood when it closes and it would be a pretty mean ram air setup. Way more efficient than the good hoods. If you are having a hard time visualizing. Then kinda like the new lightning setup.

http://www.extremefiberglassproducts.com/