2011 r/t 5/7 drop
11-21-2011, 05:57 PM
#41
Teching In
Thread Starter
Join Date: Sep 2011
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
sorry i havnt gotten to your previous comment but here ya go
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
11-21-2011, 10:51 PM
#44
Launching!
Join Date: Jun 2008
Location: RgV
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
sorry i havnt gotten to your previous comment but here ya go
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
Thread
Thread Starter
Forum
Replies
Last Post
