2011 r/t 5/7 drop
Nov 21, 2011 | 05:57 PM
#41
Thread Starter
Teching In
Joined: Sep 2011
Posts: 31
Likes: 0
sorry i havnt gotten to your previous comment but here ya go
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
Nov 21, 2011 | 10:51 PM
#44
Launching!
Joined: Jun 2008
Posts: 218
Likes: 0
From: RgV
sorry i havnt gotten to your previous comment but here ya go
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
front, 2 inch drop spindles, we put a 3 inch drop spring in but it was way to low rubbing fender liners to much for a daily. so we took the factory spring and cut 3/4 inch of the coil off. thats the front the back we raised the spring perch 1 1/2 inches and used 4 inch belltech drop springs. for shocks i used the nitro 2 drop shocks for a 5 inch drop,
i plan to go lower once i get new tires, but that will involve cutting in the front next
oh and BTW rides 100xs better than stock so smooth going down the road
Thread
Thread Starter
Forum
Replies
Last Post
