Usabodyguard's Project - Blwnlsx
#71
Awesome truck/build. That is one hell of a project, looks like you're sparing no expense
Who made the wheels for you? Forged wheels are the only way to go!
Where are you in southern California, I might have to check it out when you're done.
Who made the wheels for you? Forged wheels are the only way to go!
Where are you in southern California, I might have to check it out when you're done.
#72
Prowheels made the wheels for me, 22x10's and i wrapped them in 420's...
Im in ventura county... truck is STILL at the paint and body... he is finishing up the door jams and sills... had an issue with my damn tonneau cover (snugtop SL) one of the shocks went bad and it screwed up the paint so he had to reshoot and entire section... snugtop will be getting a phone call from me tomorrow

I should be picking up the truck in two weeks fully complete with paint and body... then it is off to TRADERS (shameless plug) for the complete suspension install, all belltech - drop spindles, torsion keys, hangers and shackles, shims, front and rear sway bars, street scene shocks... some calvert racing caltracs, and the wheels and tires... that should take a day or two at Traders... once that is done she will be pretty much done on the exterior.
Then she is off for a new interior/stereo, which, whatever, the one in it is badass - katzkin suede and leather seats and suede headliner... but I am doing a full new interior, along with the 5 gauges (see earlier post)... while this is being done I will have the motor and sc built and ready to go by the end of August... hopefull by the end of Sept the motor and sc will be installed and tuned... early October one last trip to the paint booth for some custom graphics (top secret) and then off to sema in early Nov!
best thing about my job is i can write off the entire truck... lol FTW baby!
Im in ventura county... truck is STILL at the paint and body... he is finishing up the door jams and sills... had an issue with my damn tonneau cover (snugtop SL) one of the shocks went bad and it screwed up the paint so he had to reshoot and entire section... snugtop will be getting a phone call from me tomorrow

I should be picking up the truck in two weeks fully complete with paint and body... then it is off to TRADERS (shameless plug) for the complete suspension install, all belltech - drop spindles, torsion keys, hangers and shackles, shims, front and rear sway bars, street scene shocks... some calvert racing caltracs, and the wheels and tires... that should take a day or two at Traders... once that is done she will be pretty much done on the exterior.
Then she is off for a new interior/stereo, which, whatever, the one in it is badass - katzkin suede and leather seats and suede headliner... but I am doing a full new interior, along with the 5 gauges (see earlier post)... while this is being done I will have the motor and sc built and ready to go by the end of August... hopefull by the end of Sept the motor and sc will be installed and tuned... early October one last trip to the paint booth for some custom graphics (top secret) and then off to sema in early Nov!
best thing about my job is i can write off the entire truck... lol FTW baby!
#74
#75
i called snugtop... wow what a PITA they are... i have to deal with the original shop i purchased my lid from... and that guy is a complete and total D-Bag... i wouldnt even buy an air freshener from.
Anyone here have any connections at snugtop?? please pm me... TIA!
Anyone here have any connections at snugtop?? please pm me... TIA!
#76
GFYS and STFU
iTrader: (8)
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
#77
I really like the transmission stuff for some reason looks so nice, Of course I may be a little biased lol
TRANSMISSION DRIVELINE BUILD UP CONT...
Overun and overdrive clutch drum

Overun/overdrive drum with frictions installed

OD assembly ready to install

OD assembly installed into the case.

Installing the Stage 1 overdrive frictions and new steels

OD clutches installed complete.

Close up of billet input shaft from CK PERFORMANCE.

Pump installed with new front seal

Case VB channels with low/reverse and intermediate overun servos along with check ball installed.

a couple more pics...


Custom install by CRC transmission, with custom crossmember

Fully built drive line, with all new u joints and sleeved and shortened - courtesy of Coast Drive line and Gear

So why the forged/built transmission... find out in the next post!
Overun and overdrive clutch drum

Overun/overdrive drum with frictions installed

OD assembly ready to install

OD assembly installed into the case.

Installing the Stage 1 overdrive frictions and new steels

OD clutches installed complete.

Close up of billet input shaft from CK PERFORMANCE.

Pump installed with new front seal

Case VB channels with low/reverse and intermediate overun servos along with check ball installed.

a couple more pics...


Custom install by CRC transmission, with custom crossmember

Fully built drive line, with all new u joints and sleeved and shortened - courtesy of Coast Drive line and Gear

So why the forged/built transmission... find out in the next post!

#78
MORE PARTS....
this came in today...
audio parts and wire loom... im going to run DUAL batteries and therefore have 2 set of stinger terminals...

this came in today too... Meziere EWP... color matched to my truck.


truck comes out of paint tomorrow and the off to suspension and drop with wheels on Friday... doing a tech article for truckin' will post some pics...
this came in today...
audio parts and wire loom... im going to run DUAL batteries and therefore have 2 set of stinger terminals...

this came in today too... Meziere EWP... color matched to my truck.


truck comes out of paint tomorrow and the off to suspension and drop with wheels on Friday... doing a tech article for truckin' will post some pics...
Last edited by usabodyguard; Aug 12, 2008 at 11:54 PM.



