Was that divider in the collector with the original wastegate elbow?

 

That guy should learn to tig...welds look cold to me. What iat sensor is that?

 

Yea the divider has been there. The wastegate port was basically centered on it before, and the hole was much smaller.

 

Atomic, what volume of oil do you run?

 

140+ pages is way to many to go thru.

What converter are you running and how do you like it?

 

I usually run 6.5 courts or so taking a cooler and turbo into account i fugure it needs a little bit more.

I have a Yank PT 3200. It's really good except the lockup sucks if I had to do it again I will get the multi disc version

 

Good to know, i would like to lock mine up under boost and wasnt sure if it would hold. I just see alot of guys with trucks running the PY and not the PT.

 

Joey has the PY3600 and locks it up at 19psi lol. I haven't ridden in it at that level but he says its real nice

 

Real nice

 

Richard, a little of subject but could you measure from the top of the valley plate to the top of your Holley intake at #6 or #8 intake runners? I'm curious to see if the height is the same as my Pro-Flo for an up coming project.