New project
#1
TECH Fanatic
Thread Starter
Join Date: Jul 2006
Location: K.C.
Posts: 1,737
Likes: 0
Received 0 Likes
on
0 Posts
New project
Back in the truck world again. Just not with a gm this time.
93 ranger XL
2.3 turbo swap
t5 trans
8.8 rear with 3.73 gears
LA3 ecu
Brown tops
Big VAM
Dead in the water.
I was told it needed just a head gasket. not so much. bottom end was locked up. Got it unstuck. Just said screw it and going through the entire engine. Collecting parts for the build and going for 400whp with it.
HX35Y turbo
Stock short block with ARP hardware
Felpro 1035 HG
Stock head bolts
Mildly ported head
BoPort 1.5 cam
full roller setup
Esslinger cam gear
Ported intake manifold {upper and lower}
ID1k injuectors
Walbro 450 pump
Aeromotive FPR
Joe MBC
Stinger exhaust header
Stinger PiMP system {standalone}
New IC piping
CXracing Fmic
3.5 inch dp
3.5 inch exhaust
hopes and dreams.
Not really pretty right now under the hood.
93 ranger XL
2.3 turbo swap
t5 trans
8.8 rear with 3.73 gears
LA3 ecu
Brown tops
Big VAM
Dead in the water.
I was told it needed just a head gasket. not so much. bottom end was locked up. Got it unstuck. Just said screw it and going through the entire engine. Collecting parts for the build and going for 400whp with it.
HX35Y turbo
Stock short block with ARP hardware
Felpro 1035 HG
Stock head bolts
Mildly ported head
BoPort 1.5 cam
full roller setup
Esslinger cam gear
Ported intake manifold {upper and lower}
ID1k injuectors
Walbro 450 pump
Aeromotive FPR
Joe MBC
Stinger exhaust header
Stinger PiMP system {standalone}
New IC piping
CXracing Fmic
3.5 inch dp
3.5 inch exhaust
hopes and dreams.
Not really pretty right now under the hood.
Thread
Thread Starter
Forum
Replies
Last Post