GMC Syclone #569 Build
#42
10 Second Truck Club
Thread Starter
Thanks, I'm trying very hard to leave the Silverado alone, but I keep eyeballing these: Texas Speed Headers
#44
10 Second Truck Club
Thread Starter
So here's where I am at now. I did the valve seals to help aid with the heavy smoking. I found a few of them not seated on the stems properly, so that was likely why it had so much of a problem.
Now that I have completed that, it does still burn a little oil and smoke some. A quick powerbrake video kind of exhibits when I see it. It's not terrible, but not great.
Here's the video:
Now that I have completed that, it does still burn a little oil and smoke some. A quick powerbrake video kind of exhibits when I see it. It's not terrible, but not great.
Here's the video:
#47
10 Second Truck Club
Thread Starter
So nothing good in terms of news. I thought I was chasing a valvetrain noise issue all this time. A flawlessly clean oil filter had me convinced that it was a lifter.
Yesterday after doing a final hot valve adjustment, I put the truck up on the lift and ran it. Up top it is very quiet at idle and most of the noise is part throttle.
BUT...
Under the truck the noise is prominent at idle too, definitely looks like I've been dumping a bunch of time and money into a motor that was never any good. I wish I lived on the east coast, I'd take it back to the "rebuilder" lol.
So at this point I'm not sure what I want to do. This is alot more than I signed up for.
Yesterday after doing a final hot valve adjustment, I put the truck up on the lift and ran it. Up top it is very quiet at idle and most of the noise is part throttle.
BUT...
Under the truck the noise is prominent at idle too, definitely looks like I've been dumping a bunch of time and money into a motor that was never any good. I wish I lived on the east coast, I'd take it back to the "rebuilder" lol.
So at this point I'm not sure what I want to do. This is alot more than I signed up for.
#48
10 Second Truck Club
Thread Starter
Just gonna send it. Installed my MSD 6AL-2 today and tested the 2step. Works good, video is at 1800rpm.
https://youtu.be/U_tfNrkYmQc
https://youtu.be/U_tfNrkYmQc
#49
10 Second Truck Club
Thread Starter
Played around today, buttoned up the interior and took a clear days chance to drive some and get a touch of datalogging. Traffic was kinda shitty, need to go find some open roads tomorrow.
#50
10 Second Truck Club
Thread Starter
Took the Syclone to the track for a shakedown. It needs some stuff, like a healthy fuel pump and a tq converter, but I managed a 12.01 @ 113mph.
Few things to fix, but it's a good start!
Few things to fix, but it's a good start!