Forged 370 coming together.
Just wanted to post up a few pics of my build. Seems like there are a few of us building 370's on here so I'd thought I'd join the crowd and post up. Still have a few loose ends to tie up but it's coming together. It's getting there thanks to the help of a few people you might recognize from Grippy's build-up. Same master builder(Rex), same shop(WCCH), same mad scientist who put it together (Richard who stays behind the scenes) and similar pictures.
It's more of a sponsor build than anything:): WCCH 245cc Edelbrock Heads FLT 4L80E LVL-5 STS GT-76 ABEAR Motorsports VC's StylinConcept's BP's http://i72.photobucket.com/albums/i1...n/IMG_0179.jpg Block before the SLUT get's his hands on it... http://i72.photobucket.com/albums/i1...n/IMG_0187.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0201.jpg The SLUT finally got his hands on it...Some people just don't know how to respect other people's property...WHACK it again REX!! http://i72.photobucket.com/albums/i1...n/IMG_0183.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0187.jpg Master Builder building masterfully http://i72.photobucket.com/albums/i1...n/IMG_0172.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0183.jpg Crank, piston, rings, and a few Rods. http://i72.photobucket.com/albums/i1...n/IMG_0173.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0172.jpg My Rods are on the far right. Left is stock(bent) Middle is Probe 4340 forged I-beams(Same as Grippy's). I'm gonna need a little extra beef for what I have planned. http://i72.photobucket.com/albums/i1...n/IMG_0168.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0173.jpg Lined up and ready for their new home. http://i72.photobucket.com/albums/i1...n/CIMG1371.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0168.jpg It's giving me blueballz just looking at it.:nutkick: Still have a few things to finish up. |
Lookin good. :judge:
Cam? |
looking good im anxious to see you get it in there
you using stock crank ? and what final compression will you have you runnin high boost or moderate boost + spray |
glad to see you have Rex building your engine, he is Awesome! His knowledge and attention to detail is second to none!
I see he bought a new T-Shirt as well, LOL, good on ya Rex! Did you go with the Ackerly & Childs Rings spec'd by Rex? Melling Oil Pump with the "bad ass" spring in there? |
Looks purdy so far! Any man who builds engines while drinking Mt. Dew is a pro :judge: :chug:
|
Hey Dude!
Originally Posted by moregrip
glad to see you have Rex building your engine, he is Awesome! His knowledge and attention to detail is second to none!
I see he bought a new T-Shirt as well, LOL, good on ya Rex! Did you go with the Ackerly & Childs Rings spec'd by Rex? Melling Oil Pump with the "bad ass" spring in there? |
Originally Posted by jetmann
I had that shirt but thought that it was good to wear second time around! :judge: And yes it has all the good stuff.
Unfortunately I'll be out to Sea again next week :bang: when it rains it pours :chug: |
Originally Posted by TurboGibbs
Lookin good. :judge:
Cam? |
Originally Posted by Spoolin
224/230 .050" of valve lift on each
|
Originally Posted by nightrunner
looking good im anxious to see you get it in there
you using stock crank ? and what final compression will you have you runnin high boost or moderate boost + spray Final compression is 8.8:1 I'm gonna be running a high boost appplication. I'm shooting for 20lbs-22lbs. I have to play around with my A/R housing first to see what works best. I have a pretty small one in there now. |
whoa! 20lbs.,:eek2: have you thought about the head lifting problem, you are studding your heads right
i was contemplating doing my own mild 370 |
Yup that was one of my bigger concerns and I figure the best head guy in the biz would know the best way to keep them down. There's no guarante but I think Richard glued those heads on there best he can. If that doesn't hold...I dunno we'll see!:)
|
id trust him:thumb:
|
Originally Posted by nightrunner
I was contemplating doing my own mild 370
|
Hey Dev
Originally Posted by moregrip
Good deal bro, I expect no less than the best from you! How's your Monster Truck motor coming along?
Unfortunately I'll be out to Sea again next week :bang: when it rains it pours :chug: |
Originally Posted by jetmann
The monster truck motor was done just after I finished yours,It runs great and the owner/driver says it has sick Power! :judge:
|
nice man . looks like i started a trend. i cant wait to have my 370 in my hands . i keep hitting roadblocks with getting it together but it shouldnt be long now.
|
Couple more pics...
http://i72.photobucket.com/albums/i1...n/IMG_0202.jpg PROBE Turbo Pistons http://i72.photobucket.com/albums/i1...n/IMG_0209.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0171.jpg WCCH 245cc http://i72.photobucket.com/albums/i1...n/IMG_0211.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0209.jpg The Buissness end of things. http://i72.photobucket.com/albums/i1...k/IMG_0211.jpg |
Originally Posted by 2004SSS
nice man . looks like i started a trend. i cant wait to have my 370 in my hands . i keep hitting roadblocks with getting it together but it shouldnt be long now.
|
Hey Dev
Originally Posted by moregrip
Sweet, will he be down at the San Diego Fair (Del Mar) again this year? It's the yellow Line-X truck right?
|
Thanks Rex, I will be there this afternoon to pick it up! :devil:
|
Originally Posted by BlownChevy
Thanks Rex, I will be there this afternoon to pick it up! :devil:
|
Here you go brian, now you can go pick it up now. Would you be so kinda as to bring it to REBS for install?
It's all finished just waiting on the valve covers and tranny should be here this week from FLT. http://i72.photobucket.com/albums/i1...k/IMG_0229.jpg http://i72.photobucket.com/albums/i1...k/IMG_0228.jpg http://i72.photobucket.com/albums/i1...IMG_0230_2.jpg http://i72.photobucket.com/albums/i1...k/IMG_0459.jpghttp://i72.photobucket.com/albums/i1...k/IMG_0461.jpg http://i72.photobucket.com/albums/i1...n/IMG_0229.jpg |
What TB is that?
|
90mm TB
|
Is there an adapter inbetween the TB and intake?
|
I believe it's a billet 90mm Throttle body conversion kit for the 2002-2005 Chevy and GMC trucks and SUV's made by WCCH. The kit replaces the factory installed 75mm throttle body with the later LS2 style 90mm throttle body set-up.
|
TB's on backwards! :) The plug is on the other side.
Looks a lot like my motor... http://www.scifilogy.com/sss/intakebling/intake_frt.jpg And yes, there is a WCCH adaptor plate between the TB and intake. |
THats what I said!
I know it is,But someone told me to put it on that way. Ill never hear the end of this! :hail:
|
????Huh???? I'm gonna stay out of this !!!! I don't even want to know!
|
Originally Posted by jetmann
I know it is,But someone told me to put it on that way. Ill never hear the end of this! :hail:
|
Not Me
You know WHO is the guilty one is! lol............. :judge:
|
Is the 90mm a better choice for a 370 than the edelbrock 4bbrl TB. Sorry to get off topic, but I am thinking about build a 370 for another project.
|
Originally Posted by BlackGMC
Is the 90mm a better choice for a 370 than the edelbrock 4bbrl TB. Sorry to get off topic, but I am thinking about build a 370 for another project.
Richard :) |
Found out a few more specs so here they are:
Pistons: Probe Turbo Pistons Comp Cam : 236/230 115LSA Rings: Hellfire Rods: RPM Extreme Duty 90mmTTB Billet Adapter 90mm TB MLS Head Gasket ARP Studs and Bolts throughout High Rev Roller lifters That is all for now...Carry on :) |
Thought I would post some pics up of the Valve Covers. They look awesome and Ryan from Abear is a pleasure to work with and worked with me even though at times I'm sure like I seemed like an obnoxious customer!! His work speaks for itself.:hail:
https://i72.photobucket.com/albums/i...n/IMG_0461.jpg https://i72.photobucket.com/albums/i...n/IMG_0459.jpg https://i72.photobucket.com/albums/i...n/IMG_0458.jpg |
Bling!..........I Love 'em
|
nice covers, however you are still a homo.
|
Originally Posted by Brian@JPA
nice covers, however you are still a homo.
|
Originally Posted by Brian@JPA
nice covers, however you are still a homo.
|
All times are GMT -5. The time now is 12:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands