|
The Comeback: Phantom's ShopTruck project 2001 Sierra
Well, my last project, ChiChi, met its firey demise 12-18-17. Don't ask what happened as I don't 100% know. You're welcome to make your own assessment lol
https://cimg8.ibsrv.net/gimg/www.per...b26cbfaeb.jpeg https://cimg9.ibsrv.net/gimg/www.per...c90309bf1.jpeg These trucks are getting harder and harder to find in good shape, even if you're willing to pay a little extra. For a month, I searched all over the country looking for a replacement. Then, one day I just happen to fall into the truck I wanted since the day we finished building it. I introduce you all to, ShopTruck. https://cimg8.ibsrv.net/gimg/www.per...797deb7f7.jpeg It's a 2001 GMC Sierra. My buddy and I built this truck back in 2013. Started out life (as we knew it) as a real pile with a need for lots of body work, a 4.8 and no transmission. We went to a local salvage yard and picked up a 4l80 with converter out of an old at&t van so he could drive it. The stock 4.8 on the bottle obviously wasn't cutting it so he decided to build a healthy 408. We pulled the 4.8 while waiting for the 408 build and had his dad do all the body work to make this thing look new again. Fast forward to January 9, 2018. It is now mine! When we picked it back up, it wouldn't start, the Bogarts that my buddy had put on it were sold for $300 and it was sitting on chrome stock bullet holes, and the truck was just an all around mess. So we took it back to the shop, pulled the intake, cleaned the intake runners, intake, injectors, put new plugs in and fired right up! Also put the late model silverado wheels and tires I had from my other truck on it while we were there It set a little higher in the back end than I like. Luckily, the rear end from my truck wasn't damaged in the fire. So we took it out and put it in this truck. https://cimg4.ibsrv.net/gimg/www.per...85e62c736.jpeg https://cimg7.ibsrv.net/gimg/www.per...37b31221b.jpeg https://cimg9.ibsrv.net/gimg/www.per...599f34471.jpeg Now that it was running and looking better, I was able to start working on the tune since it was never really finished before. Did a bunch of drivability tuning and got it driving very nicely. Then decided to go WOT...120% IDC. Since I couldn't really remember what we did for the fuel system 5 years ago, I decided to just replace it all. I had #95 injectors, 450 pump, and 10 micron filter from Deatschwerks left over from what I planned to do with my last build, so I through it all in this truck. New fuel system front to back with -8 feed and return. It was a trick to get two -8 bulkheads in the stock bucket. Wish I would have taken some pics of that as it actually turned out nice. https://cimg8.ibsrv.net/gimg/www.per...0cff91fe1.jpeg https://cimg0.ibsrv.net/gimg/www.per...82adc0795.jpeg 3 of the 4 Bogarts survived the fire. I sent those 3 back to Bogart to be checked out and repolished and have a new front built. Got them back and wrapped in 28x6-17 Sportsman SR and 275pro drag radials https://cimg5.ibsrv.net/gimg/www.per...c698d1d8e.jpeg https://cimg7.ibsrv.net/gimg/www.per...1c17d25e7.jpeg Haven't really had alot of time to mess it recently as its either been too cold or we've been too busy. I did manage to sneak it in on one of our track rentals and make one pass. I was so excited to just finally get this truck down the track, I didn't even check tire pressure. It was somewhere around 30psi lol. Anyways, managed a 1.72 7.65 at 91mph. Would prolly translate into a high 11.9x at around 115mph. Pretty much exactly what I expected with what I'm working with currently. Current setup: 11.5:1ish 408 SDPC L92 heads ebay 3.5 CAI Vic Jr. elbow with 92mm ebay tb 91 octane 1.75" pacesetter headers crush bend 3" dual exhaust bone stock 4L80 with single disk converter that flashes to 4200ish rpm 8.6 10bolt with Yukon helical posi, Yukon 4.11 gears, and Yukon axles Flipped with 2" shackles out back Cal-Tracs Lowered with springs and spindles up front Custom Kicker stereo system with 2 10" subs, amp, equalizer, and in-dash dvd/nav Truck weighs 4520 with me and 1/4 tank of gas https://cimg5.ibsrv.net/gimg/www.per...8a93c60f41.png https://cimg3.ibsrv.net/gimg/www.per...97df3ab11.jpeg https://cimg4.ibsrv.net/gimg/www.per...c9cb0f087.jpeg https://cimg5.ibsrv.net/gimg/www.per...0e03c3dd5.jpeg https://cimg6.ibsrv.net/gimg/www.per...cd22a8431.jpeg I actually loaded the truck on the trailer to take to the track a couple weeks ago. Only reason for trailering it was I planned to spray it and I don't trust the 10bolt even though it has nice parts in it lol. Electrical gremlins kept me doing anything cool though https://cimg3.ibsrv.net/gimg/www.per...7a7d238e80.png https://cimg4.ibsrv.net/gimg/www.per...39769b04e.jpeg |
I have a bunch of parts already accumulated for this truck just haven't had time to really mess with it.
Plans: 1 7/8" headers 3" mandrel bent exhaust with x-pipe Rossler 4L80 with transbrake Protorque triple disk converter Custom 4" (real) cold air intake Quick Performance 9" rear end with 40 spline axles, aluminum center section, 4.30 gears, and Wilwood brakes Nitrous Express single entry crossbar with Max 5 Controller https://cimg7.ibsrv.net/gimg/www.per...583810552.jpeg https://cimg8.ibsrv.net/gimg/www.per...dbc064741.jpeg https://cimg6.ibsrv.net/gimg/www.per...f9525952e.jpeg I also installed a Safecraft PB3 fire extinguisher on the trans tunnel. I atleast want to have a fighting chance if I'm ever to experience another fire https://cimg9.ibsrv.net/gimg/www.per...bca47144e.jpeg My immediate goals with the truck are to get all the new parts installed. I'd like to run 11.50s on motor and give it just a little sniff of nitrous to get into the 10's |
4.3 V6 my butt!! (Instagram) lol
Very nice truck. Isn’t this the one Shawn’s swinging in on an old YouTube video? |
Originally Posted by 06 4.8
(Post 5435391)
4.3 V6 my butt!! (Instagram) lol
Very nice truck. Isn’t this the one Shawn’s swinging in on an old YouTube video? |
looks better than chi chi. check out the link below. I think it's worth checking into. A buddy just picked one up for his coupe, and it looks extremely nice. I nearly shit when he said gets them on ebay for 160. I've seen claims of 40+ hp gains on N/A applications by dumping the elbows. I really think more N/A and Nitrous guys here in the truck world should look deeper into the vic-jr and 4150 throttle bodies instead of blowing their wads on junky ass lazy throttle response fast intakes.
https://www.ebay.com/itm/1200-Cfm-4-...-/301939905366 |
So sweet, i really enjoyed the last build you had.
|
Stuck it on the dyno today to make a quick pull just to see where it’s at currently. Made pretty much exactly what I figured based on the mph/weight at the track. I honestly figured it’d make the power higher though based on what the camshaft is suppose to be. Suppose to make power up to around 8k. It’s is promising though that I could see big gains with the new exhaust/induction setup
11.5:1ish 408 SDPC L92 Heads 1 3/4” headers Crush bend dual 3” exhaust Vic jr intake with elbow 92mm Tb eBay 3.5” cai 91 octane https://cimg5.ibsrv.net/gimg/www.per...023912dbb.jpeg https://cimg8.ibsrv.net/gimg/www.per...0119c3fc6.jpeg |
Don’t see 500 being out of the question at all with a true 4”+ intake and 1 7/8 and a true 3” dual setup or maybe even a single 4” exhaust
|
Screw an intake. 4150 or nothing (unless its turbo). A4" intake will probably flow more than that elbow which makes the biggest best intake pointless. Im sure it could use larger/better exhaust.
What is the cam supposed to be? I doubt there are many off the shelf cams for a single plane with ported square ports. Ive never looked though. Im sure howards has one. |
Originally Posted by TXsilverado
(Post 5435854)
Screw an intake. 4150 or nothing (unless its turbo). A4" intake will probably flow more than that elbow which makes the biggest best intake pointless. Im sure it could use larger/better exhaust.
What is the cam supposed to be? I doubt there are many off the shelf cams for a single plane with ported square ports. Ive never looked though. Im sure howards has one. Not ruling out the 4150. But I’m definitely going to try the elbow with a 4-5” intake getting actual cold air. If the 4150 is worth 20-40 hp that people claim, it can stay. If it’s 5-10, I’ll stick with the intake/tb/elbow with some filtration. It’ll be fun to experiment for sure |
| All times are GMT -5. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands