Got rid of my old Lt1 Z28 and got a new toy last weekend. 89 Mazda b2200 currently setup for sbc. 6point roll cage, Race seats/harness, fuel cell, headers/exhaust for sbc. Probably going to go with 4.8 th350 and swap my nitrous kit to this truck for 100shot. The white trim pain needs to go fast.

 

Nifty! Something different too!

-Kenny

 

Got a few updates on the project. Went with a Th400 and a low compression LMG 5.3 afm/dod delete, 317 heads, 4th gen 6.0 cam, and rings gapped for boost.






Lmg 5.3, 317 heads, and 6.0 cam




LS plate mounts

 

Rat chewed through wiring harness on a customers 08 Tahoe. Insurance bought a new harness and I repaired this one for my project. Got a 4L80e flex plate to mate to a Th400 stall.


Bought E38 pcm online. Came in and turned out it came out of a v6 Impala. Luckily able to reflash it with a usable OS from a Tahoe vin to start with before uploading HPtuners



My box of ricer goodies. Main thing I need before I can start throwing it all together is a stall converter.

 

Sweet project, I'd drive it.

 

This is pretty badass. Something different from all the S10s running around this site lol.

 

Thanks. Ready to get a stall converter so I can start throwing it all together. Haven't really touched the truck since I got it. Just gathering all the parts up. Didn't want to start wiring anything till the motor and trans are sitting in it

 

This may be a first for the site. I like it!

 

I'm probably going to make a new build thread with before during and after pictures when I get the stall and start throwing it together and start the wiring. Should be a pretty fun truck when all said and done.