370 build FINALLY getting started
#45
9 Second Truck Club
iTrader: (16)
Look's good! I orderd my stuff today! I decided to go with a flattop too. The dish volume in the stock piston is -6.6CC's , and the pistons I orderd have a-4cc valve notch. Im going to machine a small 4-5cc dish in the piston, to retain the stock compression ratio. I dicided to go with scat 6.125'' H beam rods.
#47
How do I change this text
Thread Starter
iTrader: (26)
Join Date: Jan 2005
Location: Behind the TIG welder
Posts: 7,294
Likes: 0
Received 2 Likes
on
2 Posts
Just got word from the machine shop, deck height is 9.245 so the rods, cam bearings, and gaskets have all been ordered from Texas speed. Cam and other parts will be ordered in the next few days.