2008 Silverado, 408, KB racing GT91 turbo kit
#273
It's getting pretty sporty. Messing with it all day. It's good enough to at least drive right now. Have some more tuning but I've part throttled it and makes about 10psi the way the wastegate and BOV were set up. There is a manual boost controller in the loop but backed completely off at the moment.
It feels really good and pulls really hard. I need to support my intercooler cause it's moving all over and I think that's going to break the aluminum welds.
Also have a 3" coupler off the throttle body and then a splicer to a 45* that is angle cut to make the bend to the intercooler. Well that's already blown off once. I'll need like a 4" to 3" at 60* bend for the throttle body.
It feels really good and pulls really hard. I need to support my intercooler cause it's moving all over and I think that's going to break the aluminum welds.
Also have a 3" coupler off the throttle body and then a splicer to a 45* that is angle cut to make the bend to the intercooler. Well that's already blown off once. I'll need like a 4" to 3" at 60* bend for the throttle body.
#275
The one code p0741, that HP tuners can't tune out, is back. Shifts fine still but can't get rid of it. I've already paid one tuner with EFI Live to tune this but I'm not for sure what happened there. Apparently the license for my truck is 125 so I'll probably be paying someone 125 dollars to "do not report" one code.






