2005 Pewter Rcsb build***New Project
03-31-2015, 08:53 AM
#1
Teching In
Thread Starter
Join Date: Sep 2012
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
2005 Pewter Rcsb build***New Project
Sup all, just picked this truck up last week. Got some big plans but will be a slow build. I'll update when new ish arrives.
2005 rcsb, 5.3, 3.23. 111k.
Plans for the truck are:
Suspension (want it to hook when I go big power down the road)
Wheels/tires
Cosmetic ish along the way
Cam/stall ( may turbo the 5.3 or build a 6.0 in the future)
Day I bought it:
I noticed there was a slight leak ( third brake light seal was gone )
So I went to the stealership...
Next I have to buy the wifey a MacBook air before I do any more purchasing.
2005 rcsb, 5.3, 3.23. 111k.
Plans for the truck are:
Suspension (want it to hook when I go big power down the road)
Wheels/tires
Cosmetic ish along the way
Cam/stall ( may turbo the 5.3 or build a 6.0 in the future)
Day I bought it:
I noticed there was a slight leak ( third brake light seal was gone )
So I went to the stealership...
Next I have to buy the wifey a MacBook air before I do any more purchasing.
03-31-2015, 07:15 PM
#4
Teching In
Thread Starter
Join Date: Sep 2012
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Just a prior vehicle history for myself..
08 jeep srt8.
Prior to that was a 2010 evo x -445/385 on e85
Before that I had my prized 04 c5z, wifey got pregnant while owning this so had to go. :/
And before the vette.. 07 rwd h/c/s made 430/410
08 jeep srt8.
Prior to that was a 2010 evo x -445/385 on e85
Before that I had my prized 04 c5z, wifey got pregnant while owning this so had to go. :/
And before the vette.. 07 rwd h/c/s made 430/410
Trending Topics
03-31-2015, 07:40 PM
#8
Teching In
Thread Starter
Join Date: Sep 2012
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Evo was fun, like a go kart w a lot of power lol. Vette was an animal. Miss both of them the most..
Pinstripping was done recently by prev owner so it was fresh... A heat gun or in my case hair dryer and some patience. Lol
Thanks all.
Pinstripping was done recently by prev owner so it was fresh... A heat gun or in my case hair dryer and some patience. Lol
Thanks all.
03-31-2015, 07:42 PM
#9
Teching In
Thread Starter
Join Date: Sep 2012
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Vette ran a 10.4 spinning its *** off. Was a iron 403, novi 2k @16 lbs, meth, and a rpm lvl5 tr6060. Made 856/780 on race fuel and 805/750 on 93.
Anyways, this will be a very slow build. Got a kiddo now so, funds are tied up.
Anyways, this will be a very slow build. Got a kiddo now so, funds are tied up.