NewB from GA
02-18-2010, 08:47 PM
#6
Registered User
Thread Starter
Join Date: Feb 2010
Location: Macon, GA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
thinking of dropping it just 2 inches in the back cause i do alot of hauling... what do you all think? I have a little bit of rubbing on the front with the 285's when at a full turn but its not to bad... i like the wide look the 285's have.... I plan on tinting the windows as soon as i have a warm day....
02-18-2010, 08:51 PM
#7
TECH Addict
iTrader: (3)
Join Date: Dec 2006
Location: Alvin, Texas
Posts: 2,826
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to the site, and there will be more than a hand full to assist in spending the Quan.
Level drop is conservative, and I'm sure that you'll like the way the truck handles as well.
Level drop is conservative, and I'm sure that you'll like the way the truck handles as well.
Trending Topics
03-03-2010, 08:14 PM
#10
Registered User
Thread Starter
Join Date: Feb 2010
Location: Macon, GA
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
ok guys just want to know if this has happened to anyone here before... i installed a set of 2inch drop shackles. making sure to remove the weight from the axle and not getting them to tight so not to bind the suspension... but even after all of that i have one side that sits a little higher then the other.... is it possible that i have one spring weaker than the other... i was able to pull the passenger side spring down by hand to install the bolt in the the shackle but could not budge the driver side spring by hand.... thanks for any info you all can share.....