Need help
#1
Need help
Was up guys so I needed some help or suggestions. Thanks ahead of time. I have a 2003 Chevy Silverado 1500 single cab its a v8 4.8. My question is what mods can I do too it to make it faster or for it to respond quicker it’s all stock at the moment I got it with 135,000 miles it runs nice not like my 5.3 Yukon but yea thanks guys I’m in south Cali.
#2
TECH Senior Member
iTrader: (2)
What's your budget?
Being from CA may limit your options if you want to stay CARB legal and emissions legal. Do some reading on what you can do, your options are pretty much endless.
Internal stuff would be a camshaft upgrade and the supporting parts. A custom tune along with that. You could do a supercharger kit from a vendor. You could swap gear ratios to make it get up and go quicker. The more power you add the more you'll be concerned with the weak 4L60e transmission.
Being from CA may limit your options if you want to stay CARB legal and emissions legal. Do some reading on what you can do, your options are pretty much endless.
Internal stuff would be a camshaft upgrade and the supporting parts. A custom tune along with that. You could do a supercharger kit from a vendor. You could swap gear ratios to make it get up and go quicker. The more power you add the more you'll be concerned with the weak 4L60e transmission.
#4
Thanks bro
thanks that’s some good info I think I’m going to start that way we’ll my goal is a 6.0 but that’s like later on down the road. I want to make the best of what I have now and enjoy it because I have seen some fast!!! 4.8s thanks for the info bro im going to start with the gears so you think 4.10 gears would be good? Reason being just want to get Info that’s all thanks.
#5
thanks that’s some good info I think I’m going to start that way we’ll my goal is a 6.0 but that’s like later on down the road. I want to make the best of what I have now and enjoy it because I have seen some fast!!! 4.8s thanks for the info bro im going to start with the gears so you think 4.10 gears would be good? Reason being just want to get Info that’s all thanks.
#6
yes it’s one of the best mods I’ve done for my 4.8. I run 20 inch rims(29 3/4 tall tire) and I’m at about 2500 rpm at 70 mph. The taller the wheel the more gear you want to do. So yea gears a 3200-3600 stall, free flowing exhaust (headers, cai) and a tune will get the 4.8 moving pretty good. Plus those mods will transfer over to the 6.0.
Thread
Thread Starter
Forum
Replies
Last Post
TylerCustoms
GMT 800 & Older GM General Discussion
18
09-07-2007 09:34 PM
inmywhitez
GM Engine & Exhaust Performance
10
07-26-2006 09:21 PM
one03sierra
GM Engine & Exhaust Performance
1
06-01-2003 04:34 PM