Got on the truck a few times. Pretty nice i was able to take the truck out on Jan 8th, 50 degrees and no snow in Bismarck, ND. I know i posted these vids at the end of my picture thread a few days ago, figure i would post the vides in the video section for those who missed it.

The truck is not open header and the truck does not have cutouts, this is my Cammed and Bolted 5.3 4200 stall, Pace Setter long tubes, cat delete, true dual 3" mandrel bent pipe with 3" Mangaflow race bullets, dumped before the axle.
adding a few changes ordered a few things today. 3/4 drop is currently too high, so i ordered 2" LCAs, 4" Belltech drop leafs. It will be sitting 5/8. I ordered larger tires for the rear a couple days ago. They are going from a 255/35r22 to a 265/40r22. Then as a added purk with these big open wheels, i figured big brake kit would be fun. So i bought the SSBC 14" front rotor kit and 14" rear rotor kit. Pretty amped for the new changes! I might order 22s for the front this coming summer, but i kinda like the 20/22 setup personally as of now.




Clip 1 This was about 1/4 throttle
Bolted and Cammed 5.3 GMC Sierra video 1 - YouTube

Clip 2 This was about 3/4 throttle
Bolted and Cammed 5.3 GMC Sierra video 2 - YouTube

Clip 3 This is about 3/4 throttle
Bolted and Cammed 5.3 GMC Sierra video 3 - YouTube

 

Nice ride! I like the color matching you did. Sounds awesome! Do you know how much your putting down at the wheels?

 

Thanks man, i dont have any numbers yet. Im planning on getting it on a dyno this summer and running the 1/4 mile with it too.

 

whats the specs on the cam

 

114lsa 224/236 594 lift.