I run the stock truck 78mm intake
A trucker or 212/218 would do great with a 3000 stall

 

yes but for the price of the z06 cam ls6 springs and PR's.. $400 dollars

i may go this route

 

new parts....$277 for the cam and $60 springs

 

He's still rocking STOCK pushrods, i can vouche for that bc i helped put the 220 in

 

Ask grey matter he did that swap and trapped lower at the track.. my understanding was because ur heads don't flow what that intake flows.. world great on 6.0s because the 317 heads flow much better then ur stock 5.3 heads

 

CHEVY KING yes i did the TBSS intake swap and it slowed down at the track was like 4tenths and 4 mph i lost ,,so that was sold instantly!
I ran the TBSS intake with 706 heads.....just too much intake for the 5.3 and small cam

Yes i know everyone claims to gain but mine didnt every mod i do is track tested and my truck runs consistant numbers

 

Im wanting to run a smaller cam in my 6.0 cause i dont have the support the the v.2 and the noisy valvetrain is driving me nuts. Anybody run the Z06 cam in a 6.0??

 

lownslo chris did before he put the turbo on
red n silver turbo truck

 

grey matter have u thought about going on the tbss now? i know i gained mph on my set up when i did it.. (now that u running the 243 heads)

 

I would like to try it again but thats another $400 to try it and hope it works!
If i am gonna spend the money i think it will be on 1.8 roller rockers which i know will gain 15hp