Cammed 08 13.8 @ 95mph
#1
TECH Regular
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: Crosby, TX
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Cammed 08 13.8 @ 95mph
One of a few runs at Royal Purple Raceway on 12-16-11. Didnt know about the abs fuse before hand so my truck was shutting down at 95mph so gonna go back Jan 6th and take the fuse out and hope for a 13.5-13.6
Cammed 08 Silverado 13.8 @ 95mph - YouTube
Cammed 08 Silverado 13.8 @ 95mph - YouTube
#4
TECH Regular
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: Crosby, TX
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Running titan 18s on the rear with mt et street radials 305/45/18 and stock 20s on front (getting the other set of titan 18s for the front to take care of the height difference). stalling to about 1500, any higher would spin tires. 1.9 60ft. I think i was having problems with the tires gripping because i couldnt burn em without my truck wanting to shut down. Damn abs fuse lol. Take care of that in january when i go back.
R/T .271
60' 1.958
330 5.659
1/8 8.789
MPH 78.72
1000 11.483
ET 13.821
MPH 94.73
R/T .271
60' 1.958
330 5.659
1/8 8.789
MPH 78.72
1000 11.483
ET 13.821
MPH 94.73
#6
TECH Regular
Thread Starter
iTrader: (2)
Join Date: Dec 2009
Location: Crosby, TX
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
it happened when it shifted from 2nd to 3rd and i was told it was doing it because the tires i had in the back were 3 inches smaller than the fronts and when my truck shifted it thought they were spinning since they are smaller and rotating faster. When i run stock 20s all around i have no problems pulling to 140
Trending Topics
#9
Moderator
iTrader: (16)
it happened when it shifted from 2nd to 3rd and i was told it was doing it because the tires i had in the back were 3 inches smaller than the fronts and when my truck shifted it thought they were spinning since they are smaller and rotating faster. When i run stock 20s all around i have no problems pulling to 140
My truck never done that....all it would do is shut down when i tried to spin it in the water box
Just hurry and get a clean pass with the abs fuse pulled also look into backing into the water box and heating those ETs up...they like heat