Found one of my old videos .. not the best but still an NA 13 sec timeslip with only bolt-ons.

13.91 @ 96

***EDIT*** My timeslip
4" Intake, removed headlight, HPPIII, UD pullies, ASM Headers, Cut-outs open, no weight redux, 1/4 tank gas, launched @ 1500 rpm, PI Vig 3200, 26x11.50x16 ET Streets
.........R.T. .......0.561
.........60 ft ......1.908
.........330 ft .....5.640
.........1/8 ET .....8.799
.........1/8 MPH ....77.24
.........1/4 ET .....13.918
.........1/4 MPH ....95.91


I have my nitrous pass loading as we speak...

 

Nice pass.. I also ran a 13.9 with bolt on's..

 

That awesome. 13s with bolts-ons. Good job guys.

 

Good runs!!! Speedy, I dont know how you did with just simple bolt-ons but thats really impressive.

 

The TCI sf 3000 and DR's Helped the most..

 

The month before this was my dyno:

4" Intake, HPPIII, MAF Relocate, ASM Headers, Cut-outs open, Converter LOCKED
.........RWHP: 291
.........RWTQ: 347 ft/lbs

 

where did you relocate the maf to?

 

air box to in front of TB

 

Man that 1/8 is movin thought the 1/4 would have been around .2 lower for that but then again the mph seems off.

Anyway great run I like the guy in the vid yeah he just got spanked by a truck.

 

My best NA1/4 mile is 13.74 I just don't have a video of it. For what ever reason that run felt like the converter didn't lock on the top end of the track.

Here is my best nitrous pass:
10/17/03 MagnaFlow Performance
4" Intake, Predator, Nitrous (.067 jetting dry, 1000psi) MAF Relocate, ASM Headers, Cut-outs open, Converter LOCKED
.........RWHP: 426
.........RWTQ: 511
10/18/03 Carlsbad Raceway
4" Intake, removed headlight - Nitrous (.067 jetting dry, activation at flash, 1000psi) Predator, UD pullies, ASM Headers, Cut-outs open, no weight removed Tailate, 1/8 tank gas, launched @ 1000 rpm, PI Vig 3200, 26x11.50x15 ET Streets
.........R.T. .......0.593
.........60 ft ......1.761
.........330 ft .....5.024
.........1/8 ET .....8.003
.........1/8 MPH ....86.25
.........1/4 ET .....12.310
.........1/4 MPH ....108.69