Tru-Cool Max Trans Cooler 4739 & 47391 Install Kit - Brackets & Fittings & Hardware
#626
currently, these brackets allow for a tru-cool max (part # 4739 or 47391) to be installed on 99-06 (07 classic) silverado/sierra 1500/2500/3500 trucks with a 4l60e, 4l65e, or 4l80e transmission. Will not fit trucks with allison trans. Will also fit the nbs suvs such as tahoe, yukon, avalanche, and escalade. Also updated to now fit 2007-2014, see notes below!
If you already have a factory trans cooler, this kit includes everything needed to install the tru-cool max cooler. There are two brackets, two quick disconnect fittings, a compression fitting, and the necessary hardware needed for install. The only thing you need to supply is a tubing cutter. One trans line needs to be cut and spun 180* to fit the wider stance of the cooler.
If you do not have a factory trans cooler, you will need to mod/replace one trans line, and buy a factory line that goes from the cooler to radiator.
The complete kit is $75 shipped in the usa. If you want just the brackets, and no hardware/fittings, it will be $65 shipped. My paypal address is: paypal@eadperformance.com just send the $65/$75 depending on the kit you want and include a note that you are purchasing the trans cooler brackets and make sure to include a shipping address.
I'm going to try and setup a quick paypal checkout to make purchasing these easier. I have quite a few of these kits in stock, and will update the thread if i run out of stock or if there will be any shipping delays. Typically, a kit will ship out within 24 hours, and will be shipped via usps priority.
Install guide: tru cool install guide
transfer case fluid
i also have acdelco auto trak ii fluid. $18 shipped for two quarts or $26 shipped for three quarts. You can also send payment for this via the same paypal address as above. Just send a note that its for the auto trak ii.
*stock status*
these are currently instock for immediate shipping.
***fitment update***
here's how to tell if these will fit your 2007-2014 silverado, sierra, escalade, yukon, tahoe, avalanche, suburban:
If the bottom bar of the stock trans cooler is bolted on, these brackets are a 100% direct fit/bolt on.
If the bottom bar of the stock trans cooler is welded on, these brackets will fit one of two ways:
1) cut/grind the welds and remove your stock bracket. Use self tapping screws (or another method) and bolt my bottom bracket on
or
2) if you do not want to cut/modify your stock supprt, replace the entire support. They can be had for about $60 shipped. You want part #: Gm1225262 this includes a bolted on bracket. Here's one on ebay for $60.32 shipped: support bracket on ebay
here's a picture showing where to look if you're bracket is bolted or welded on, look at the two yellow circles: bolted on bracket
.
If you already have a factory trans cooler, this kit includes everything needed to install the tru-cool max cooler. There are two brackets, two quick disconnect fittings, a compression fitting, and the necessary hardware needed for install. The only thing you need to supply is a tubing cutter. One trans line needs to be cut and spun 180* to fit the wider stance of the cooler.
If you do not have a factory trans cooler, you will need to mod/replace one trans line, and buy a factory line that goes from the cooler to radiator.
The complete kit is $75 shipped in the usa. If you want just the brackets, and no hardware/fittings, it will be $65 shipped. My paypal address is: paypal@eadperformance.com just send the $65/$75 depending on the kit you want and include a note that you are purchasing the trans cooler brackets and make sure to include a shipping address.
I'm going to try and setup a quick paypal checkout to make purchasing these easier. I have quite a few of these kits in stock, and will update the thread if i run out of stock or if there will be any shipping delays. Typically, a kit will ship out within 24 hours, and will be shipped via usps priority.
Install guide: tru cool install guide
transfer case fluid
i also have acdelco auto trak ii fluid. $18 shipped for two quarts or $26 shipped for three quarts. You can also send payment for this via the same paypal address as above. Just send a note that its for the auto trak ii.
*stock status*
these are currently instock for immediate shipping.
***fitment update***
here's how to tell if these will fit your 2007-2014 silverado, sierra, escalade, yukon, tahoe, avalanche, suburban:
If the bottom bar of the stock trans cooler is bolted on, these brackets are a 100% direct fit/bolt on.
If the bottom bar of the stock trans cooler is welded on, these brackets will fit one of two ways:
1) cut/grind the welds and remove your stock bracket. Use self tapping screws (or another method) and bolt my bottom bracket on
or
2) if you do not want to cut/modify your stock supprt, replace the entire support. They can be had for about $60 shipped. You want part #: Gm1225262 this includes a bolted on bracket. Here's one on ebay for $60.32 shipped: support bracket on ebay
here's a picture showing where to look if you're bracket is bolted or welded on, look at the two yellow circles: bolted on bracket
.
#630


